Allegro Microsystems Through Hole Chopper Stabilised Precision Hall Effect Switch 3 V 24 V, SIP, 3-Pin
- RS庫存編號:
- 170-9086
- 製造零件編號:
- A1120EUA-T
- 製造商:
- Allegro Microsystems
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計（1 袋，共 500 件）*
TWD11,050.00
(不含稅)
TWD11,600.00
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 9,500 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每袋* |
|---|---|---|
| 500 - 2000 | TWD22.10 | TWD11,050.00 |
| 2500 + | TWD21.20 | TWD10,600.00 |
* 參考價格
- RS庫存編號:
- 170-9086
- 製造零件編號:
- A1120EUA-T
- 製造商:
- Allegro Microsystems
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Allegro Microsystems | |
| Product Type | Chopper Stabilised Precision Hall Effect Switch | |
| Sensor Type | Hall Effect Sensors | |
| Technology | Chopper Stabilised Hall Effect | |
| Mount Type | Through Hole | |
| Magnetic Type | Unipolar | |
| Maximum Frequency Response | 800kHz | |
| Minimum Supply Voltage | 3V | |
| Maximum Supply Voltage | 24V | |
| Package Type | SIP | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Pin Count | 3 | |
| Width | 1.52 mm | |
| Standards/Approvals | RoHS, 100% matte tin plated leadframe, Lead (Pb) Free | |
| Height | 3.02mm | |
| Series | A1120 | |
| Length | 4.09mm | |
| Response Time | 25μs | |
| Automotive Standard | AEC-Q100 | |
| Supply Current | 4mA | |
| 選取全部 | ||
|---|---|---|
品牌 Allegro Microsystems | ||
Product Type Chopper Stabilised Precision Hall Effect Switch | ||
Sensor Type Hall Effect Sensors | ||
Technology Chopper Stabilised Hall Effect | ||
Mount Type Through Hole | ||
Magnetic Type Unipolar | ||
Maximum Frequency Response 800kHz | ||
Minimum Supply Voltage 3V | ||
Maximum Supply Voltage 24V | ||
Package Type SIP | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Pin Count 3 | ||
Width 1.52 mm | ||
Standards/Approvals RoHS, 100% matte tin plated leadframe, Lead (Pb) Free | ||
Height 3.02mm | ||
Series A1120 | ||
Length 4.09mm | ||
Response Time 25μs | ||
Automotive Standard AEC-Q100 | ||
Supply Current 4mA | ||
A1120/1/2/3/5 Chopper Stabilised Hall Effect Sensor Switches, Allegro Microsystems
The Allegro Microsystems A1120, A1121, A1122, A1123, and A1125 Hall-effect, unipolar switches are temperature-stable and stress-resistant sensor ICs. High temperature performance is MADE possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, temperature dependencies, and thermal stress.
They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA. The voltage regulator enables supply voltages of 3 V to 24 V.
For the A1120, A1121, A1122, and A1123, a south pole turns on the output and removal turns off the output. For the A1125, it is reversed and the south pole turns off the A1125 output.
Unipolar switchpoints
Resistant to physical stress
Superior temperature stability
Output short circuit protection
Operation from unregulated supply
Hall Effect Sensors, Allegro MicroSystems
相關連結
- Allegro Microsystems Through Hole Chopper Stabilised Precision Hall Effect Switch 3 V 24 V 3-Pin
- Allegro Microsystems Through Hole Hall Effect Sensor 3 V 24 V 3-Pin
- Allegro Microsystems Through Hole Hall Effect Sensor 4.5 V 5.5 V 3-Pin
- Allegro Microsystems Through Hole Hall Effect Sensor 3.8 V 24 V 3-Pin
- Allegro Microsystems Through Hole Hall Effect Sensor 2.4 V 5.5 V 3-Pin
- Allegro Microsystems 1-Axis Through Hole Hall Effect Sensor 4.5 V 5.5 V 3-Pin
- Allegro Microsystems 1-Axis Through Hole Hall Effect Sensor 4.5 V 5.5 V SIP, 3-Pin
- Allegro Microsystems 1-Axis Through Hole Hall Effect Sensor 3 V 3.6 V SIP, 3-Pin