Murata 3-Axis Surface Sensor 3 V 3.6 V, SPI, DFL, 12-Pin
- RS庫存編號:
- 144-6560
- 製造零件編號:
- SCA3300-D01-1
- 製造商:
- Murata
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計（1 件）*
TWD1,052.00
(不含稅)
TWD1,104.60
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 13 件準備從其他地點送貨
- 加上 92 件從 2026年1月13日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 - 24 | TWD1,052.00 |
| 25 - 49 | TWD1,027.00 |
| 50 + | TWD1,011.00 |
* 參考價格
- RS庫存編號:
- 144-6560
- 製造零件編號:
- SCA3300-D01-1
- 製造商:
- Murata
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Murata | |
| Sensor Type | Accelerometer | |
| Product Type | Sensor | |
| Number of Axis | 3 | |
| Technology | Capacitive 3D MEMS | |
| Mount Type | Surface | |
| Interface Type | SPI | |
| Maximum Frequency Response | 88Hz | |
| Minimum Frequency Response | 10Hz | |
| Minimum Supply Voltage | 3V | |
| Package Type | DFL | |
| Maximum Supply Voltage | 3.6V | |
| Sensitivity | 5400LSB/g | |
| Minimum Operating Temperature | -40°C | |
| Pin Count | 12 | |
| Maximum Operating Temperature | 125°C | |
| Height | 3.3mm | |
| Width | 7 mm | |
| Length | 8.6mm | |
| Standards/Approvals | No | |
| Automotive Standard | No | |
| 選取全部 | ||
|---|---|---|
品牌 Murata | ||
Sensor Type Accelerometer | ||
Product Type Sensor | ||
Number of Axis 3 | ||
Technology Capacitive 3D MEMS | ||
Mount Type Surface | ||
Interface Type SPI | ||
Maximum Frequency Response 88Hz | ||
Minimum Frequency Response 10Hz | ||
Minimum Supply Voltage 3V | ||
Package Type DFL | ||
Maximum Supply Voltage 3.6V | ||
Sensitivity 5400LSB/g | ||
Minimum Operating Temperature -40°C | ||
Pin Count 12 | ||
Maximum Operating Temperature 125°C | ||
Height 3.3mm | ||
Width 7 mm | ||
Length 8.6mm | ||
Standards/Approvals No | ||
Automotive Standard No | ||
- COO (Country of Origin):
- FI
Accelerometer ICs, Murata
Murata's low-g acceleration sensors include high performance digital and analog accelerometers for both safety critical automotive and industrial applications. Based on 3D MEMS technology and intended for horizontal or vertical measurements. The sensing element and the measuring ASIC are assembled in a dual-in-line or dual-in-flat-line plastic package with pins for surface mount and re-flow soldering.
The zero point temperature dependence is less than 1mg/°C. Environmentally protected with silicone gel for high reliability in a humid environment and during temperature cycling. The sensing element design with over damped frequency response enables excellent performance even in harsh and vibrating environments.
The measuring direction is parallel or perpendicular to the mounting plane. The ASIC includes an on-chip EEPROM memory with the calibration coefficients for unit interchangeability.
Murata accelerometers include failure detection: digitally activated self-test, calibration memory parity or check sum check and continuous connection failure detection.
Accelerometers, Murata
相關連結
- Murata 3-Axis Surface Sensor 3 V 3.6 V DFL, 12-Pin
- Murata 3-Axis Surface Inclinometer 3 V 3.6 V Surface Mount, 12-Pin
- Murata 3-Axis Surface Sensor 3 V 3.6 V 24-Pin
- Murata 3-Axis Surface Accelerometer & Gyroscope 3 V 3.6 V SOIC, 32-Pin
- Murata 1-Axis Surface Inclinometer 3 V 3.6 V Surface Mount, 12-Pin
- Murata 3-Axis Surface High Performance Accelerometer 3 V 3.6 V Surface Mount, 12-Pin
- STMicroelectronics 3-Axis Surface Sensor 1.71 V 3.6 V LGA, 12-Pin
- STMicroelectronics 3-Axis Surface Accelerometer 1.71 V 3.6 V LGA, 16-Pin