Infineon SIPMOS Type P-Channel MOSFET, 330 mA, 60 V Enhancement, 3-Pin SOT-23 BSS83PH6327XTSA1
- RS庫存編號:
- 753-2857
- 製造零件編號:
- BSS83PH6327XTSA1
- 製造商:
- Infineon
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
查看批量定價選項小計（1 包，共 50 件）*
TWD460.00
(不含稅)
TWD483.00
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 加上 500 件從 2026年8月10日 起發貨
- 加上 35,550 件從 2026年8月17日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每包* |
|---|---|---|
| 50 - 700 | TWD9.20 | TWD460.00 |
| 750 - 1450 | TWD7.80 | TWD390.00 |
| 1500 + | TWD7.30 | TWD365.00 |
* 參考價格
- RS庫存編號:
- 753-2857
- 製造零件編號:
- BSS83PH6327XTSA1
- 製造商:
- Infineon
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Infineon | |
| Channel Type | Type P | |
| Product Type | MOSFET | |
| Maximum Continuous Drain Current Id | 330mA | |
| Maximum Drain Source Voltage Vds | 60V | |
| Package Type | SOT-23 | |
| Series | SIPMOS | |
| Mount Type | Surface | |
| Pin Count | 3 | |
| Maximum Drain Source Resistance Rds | 3Ω | |
| Channel Mode | Enhancement | |
| Maximum Power Dissipation Pd | 360mW | |
| Typical Gate Charge Qg @ Vgs | 2.38nC | |
| Minimum Operating Temperature | -55°C | |
| Forward Voltage Vf | -1.1V | |
| Maximum Operating Temperature | 150°C | |
| Standards/Approvals | No | |
| Length | 2.9mm | |
| Height | 1mm | |
| Automotive Standard | AEC-Q101 | |
| 選取全部 | ||
|---|---|---|
品牌 Infineon | ||
Channel Type Type P | ||
Product Type MOSFET | ||
Maximum Continuous Drain Current Id 330mA | ||
Maximum Drain Source Voltage Vds 60V | ||
Package Type SOT-23 | ||
Series SIPMOS | ||
Mount Type Surface | ||
Pin Count 3 | ||
Maximum Drain Source Resistance Rds 3Ω | ||
Channel Mode Enhancement | ||
Maximum Power Dissipation Pd 360mW | ||
Typical Gate Charge Qg @ Vgs 2.38nC | ||
Minimum Operating Temperature -55°C | ||
Forward Voltage Vf -1.1V | ||
Maximum Operating Temperature 150°C | ||
Standards/Approvals No | ||
Length 2.9mm | ||
Height 1mm | ||
Automotive Standard AEC-Q101 | ||
Infineon SIPMOS Series MOSFET, 60V Maximum Drain Source Voltage, 3Ω Maximum Drain Source Resistance - BSS83PH6327XTSA1
This p-channel MOSFET is a surface-mount switching transistor designed for compact power-control roles in electronic assemblies. It operates as an enhancement-mode device suitable for low-current switching in systems that demand a wide operating temperature range and compatibility with automotive-grade requirements.
Features and Benefits:
• 60V drain-source rating enables higher-voltage switching applications
• 3Ω maximum Rds reduces conduction losses during on-state
• 330mA continuous drain current supports small-signal switching
• 2.38nC typical gate charge yields faster gate transitions
• 20V maximum gate-source voltage allows flexible gate drive levels
• AEC-Q101 qualification ensures suitability for automotive electronics
• 3Ω maximum Rds reduces conduction losses during on-state
• 330mA continuous drain current supports small-signal switching
• 2.38nC typical gate charge yields faster gate transitions
• 20V maximum gate-source voltage allows flexible gate drive levels
• AEC-Q101 qualification ensures suitability for automotive electronics
Applications
• Suitable for battery-management and load-disconnect circuits
• Ideal for signal switching in automotive sensor interfaces
• Used with low-power regulator and power-rail switching stages
• Can be used for polarity-reverse protection in compact devices
• Suitable for surface-mount prototypes and dense PCB layouts
• Ideal for signal switching in automotive sensor interfaces
• Used with low-power regulator and power-rail switching stages
• Can be used for polarity-reverse protection in compact devices
• Suitable for surface-mount prototypes and dense PCB layouts
What thermal extremes can the device tolerate in real-world use?
It is specified to operate from -55°C up to 150°C, enabling use in both cold-start and high-temperature environments without derating of basic functionality.
How does the package influence board-level assembly and layout?
The SOT-23 surface-mount package is compact and suited to automated placement, permitting tight component spacing and simplified thermal conduction to the PCB.
What power dissipation should designers expect under normal conditions?
The device has a maximum power dissipation of 360mW, which should be accounted for in thermal calculations and thermal pad design to prevent overheating.
How does the component’s gate charge affect switching performance?
A typical gate charge of 2.38nC minimises required gate-drive energy, improving switching speed and reducing driver current for low-frequency or pulse applications.
相關連結
- Infineon SIPMOS Type P-Channel MOSFET 60 V Enhancement, 3-Pin SOT-23
- Infineon SIPMOS Type P-Channel MOSFET 60 V Enhancement, 3-Pin SOT-23 BSS84PH6327XTSA2
- Infineon SIPMOS Type N-Channel MOSFET 60 V Enhancement, 3-Pin SOT-23
- Infineon SIPMOS Type N-Channel MOSFET 240 V Enhancement, 3-Pin SOT-23
- Infineon SIPMOS Type N-Channel MOSFET 60 V Enhancement, 3-Pin SOT-23
- Infineon SIPMOS Type P-Channel MOSFET 250 V Enhancement, 3-Pin SOT-89
- Infineon SIPMOS Type P-Channel MOSFET 100 V Enhancement, 4-Pin SOT-223
- Infineon SIPMOS Type P-Channel MOSFET 250 V Enhancement, 4-Pin SOT-223