ABB Monitoring Relay, 3 Phase, DPDT, DIN Rail
- RS庫存編號:
- 775-8040
- 製造零件編號:
- 1SVR740885R1300 CM-MPS.11P
- 製造商:
- ABB
此圖片僅供參考，請參閲產品詳細資訊及規格
小計（1 件）*
TWD10,021.00
(不含稅)
TWD10,522.05
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 1 件從 2026年10月09日 起裝運發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD10,021.00 |
* 參考價格
- RS庫存編號:
- 775-8040
- 製造零件編號:
- 1SVR740885R1300 CM-MPS.11P
- 製造商:
- ABB
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | ABB | |
| Product Type | Monitoring Relay | |
| Electrical Phase | 3 | |
| Function | Multifunction | |
| Contact Configuration | DPDT | |
| Mount Type | DIN Rail | |
| Switching Voltage | 24V | |
| Terminal Type | Push-in | |
| IP Rating | IP20, IP50 | |
| Minimum Operating Temperature | -25°C | |
| Maximum Operating Temperature | 60°C | |
| Length | 103.7mm | |
| Standards/Approvals | C-Tick, EN 50178, CB scheme, RMRS, UL 508, GOST, 2006/95/EC, CCC, IEC/EN 60255-6, 2004/108/EC, GL, 2002/95/EC, CAN/CSA C22.2 No.14, CE | |
| Height | 85.6mm | |
| Width | 22.5mm | |
| Series | CM-MPS | |
| 選取全部 | ||
|---|---|---|
品牌 ABB | ||
Product Type Monitoring Relay | ||
Electrical Phase 3 | ||
Function Multifunction | ||
Contact Configuration DPDT | ||
Mount Type DIN Rail | ||
Switching Voltage 24V | ||
Terminal Type Push-in | ||
IP Rating IP20, IP50 | ||
Minimum Operating Temperature -25°C | ||
Maximum Operating Temperature 60°C | ||
Length 103.7mm | ||
Standards/Approvals C-Tick, EN 50178, CB scheme, RMRS, UL 508, GOST, 2006/95/EC, CCC, IEC/EN 60255-6, 2004/108/EC, GL, 2002/95/EC, CAN/CSA C22.2 No.14, CE | ||
Height 85.6mm | ||
Width 22.5mm | ||
Series CM-MPS | ||
- COO (Country of Origin):
- DE
CM-MPS x3 Multifunctional Three-Phase Monitoring Relays
The CM-MPSx3 are multifunctional monitoring relays for three-phase mains. They monitor the phase parameters phase sequence, phase failure, over- and undervoltage and phase unbalance. CM-MPS.23 also monitors the neutral for interruption. The threshold values for over and undervoltage and phase unbalance are adjustable. CM-MPS.23 is also suitable for monitoring single-phase mains. For this, all three external conductors (L1, L2, L3) have to be jumpered and connected as one single conductor. Phase sequence monitoring has to be deactivated and the threshold value for phase unbalance has to be set to the maximum (25 %).
Monitoring of three-phase mains for phase sequence (can be switched off), phase failure, over and undervoltage as well as phase unbalance
Automatic phase sequence correction configurable
Interrupted neutral monitoring possible with CM-MPS.23
CM-MPS.23 can also be used to monitor single-phase mains
Can be used for mains with a frequency of 45 to 440 Hz
Threshold values for phase unbalance, over- and undervoltage are adjustable as absolute values
Tripping delay can be adjusted or switched off by means of a logarithmic scale
ON-delayed or OFF-delayed tripping delay selectable
Powered by the measuring circuit
True RMS measuring principle
1x2 or 2x1 c/o (SPDT) contact configurable
3 LEDs for status indication