ABB Monitoring Relay, 1 Phase, DPDT, DIN Rail, 0.1mA to 100mA, 240 V dc, 240V ac
- RS庫存編號:
- 775-8037
- 製造零件編號:
- 1SVR740840R0400 CM-SRS.21P
- 製造商:
- ABB
此圖片僅供參考，請參閲產品詳細資訊及規格
小計（1 件）*
TWD9,079.00
(不含稅)
TWD9,532.95
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 1 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD9,079.00 |
* 參考價格
- RS庫存編號:
- 775-8037
- 製造零件編號:
- 1SVR740840R0400 CM-SRS.21P
- 製造商:
- ABB
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | ABB | |
| Product Type | Monitoring Relay | |
| Electrical Phase | 1 | |
| Contact Configuration | DPDT | |
| Mount Type | DIN Rail | |
| Minimum Current Sensed | 0.1mA | |
| Power Consumption | 0.75W | |
| Maximum Current Sensed | 100mA | |
| Switching Voltage | 240V | |
| Current Sensitivity | Undercurrent, Overcurrent | |
| Terminal Type | Push-in | |
| IP Rating | IP20 | |
| Minimum Operating Temperature | +60°C | |
| Supply DC Voltage | 240 V dc | |
| Supply AC Voltage | 240V ac | |
| Maximum Operating Temperature | 60°C | |
| Length | 103.7mm | |
| Width | 22.5mm | |
| Series | CM-SRS | |
| Standards/Approvals | RoHS | |
| Height | 85.6mm | |
| 選取全部 | ||
|---|---|---|
品牌 ABB | ||
Product Type Monitoring Relay | ||
Electrical Phase 1 | ||
Contact Configuration DPDT | ||
Mount Type DIN Rail | ||
Minimum Current Sensed 0.1mA | ||
Power Consumption 0.75W | ||
Maximum Current Sensed 100mA | ||
Switching Voltage 240V | ||
Current Sensitivity Undercurrent, Overcurrent | ||
Terminal Type Push-in | ||
IP Rating IP20 | ||
Minimum Operating Temperature +60°C | ||
Supply DC Voltage 240 V dc | ||
Supply AC Voltage 240V ac | ||
Maximum Operating Temperature 60°C | ||
Length 103.7mm | ||
Width 22.5mm | ||
Series CM-SRS | ||
Standards/Approvals RoHS | ||
Height 85.6mm | ||
- COO (Country of Origin):
- DE
CM-SRS Current Monitoring, Single Phase AC/DC
Depending on the configuration, the current monitoring relays CM-SRS.1 and CM-SRS.2 can be used for over- or undercurrent monitoring in single-phase AC and/or DC systems. The current to be monitored (measured value) is applied to terminals B1/B2/B3-C. The devices work according the open-circuit principle.
If the measured value exceeds resp. drops below the adjusted threshold value, the output relay(s) energize(s): on the CM-SRS.1 immediately, on the CM-SRS.2 after the set tripping delay TV.
Monitoring of DC- and AC-currents: CM-SRS.x1: 3mA - 1A and CM-SRS.x2: 0.3-15A
RMS measuring principle
One device includes 3 measuring ranges
Over- or undercurrent monitoring configurable
Hysteresis adjustable from 3-30%
Tripping delay TV adjustable 0.1-30s
CM-SRS.1: 1 c/o contact
CM-SRS.2: 2 c/o contacts
22.5mm width
3 LED's for status indication
相關連結
- ABB Monitoring Relay DPDT 0.1mA to 100mA 240V ac
- ABB Monitoring Relay SPDT 0.1mA to 100mA 240V ac
- ABB Monitoring Relay DPDT 0.3A to 15A 240V ac
- ABB Monitoring Relay DPDT 240V ac 240 V dc
- ABB Monitoring Relay DPDT 240V ac 240 V dc
- ABB Monitoring Relay SPDT 0.3A to 15A 240V ac
- ABB Monitoring Relay 1 Phase DIN Rail, 240V ac 240 V dc
- ABB Monitoring Relay 3 Phase DIN Rail, 240V ac 240 V dc