Dold Monitoring Relay, 3 Phase, SPDT, DIN Rail, 110V ac, 230 V ac 24 V dc

RS庫存編號:: 445-9074
製造零件編號:: BH9097.38/001 3AC400V AC40A
製造商:: Dold

Dold Monitoring Relay, 3 Phase, SPDT, DIN Rail, 110V ac, 230 V ac 24 V dc

小計（1 件）*

TWD18,770.00

(不含稅)

TWD19,708.50

訂單超過 $1,300.00 免費送貨

暫時缺貨

2 件從 2026年6月08日起裝運發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD18,770.00

* 參考價格

RS庫存編號:: 445-9074
製造零件編號:: BH9097.38/001 3AC400V AC40A
製造商:: Dold

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Dold
	Product Type	Monitoring Relay
	Function	Motor Control
	Electrical Phase	3
	Contact Configuration	SPDT
	Mount Type	DIN Rail
	Switching Voltage	230V ac
	Terminal Type	Screw
	IP Rating	IP20, IP40
	Supply AC Voltage	110, 230V ac
	Supply DC Voltage	24 V dc
	Minimum Operating Temperature	-20°C
	Contact Current	5A
	Maximum Operating Temperature	55°C
	Series	BH 9097
	Height	84mm
	Length	121mm
	Width	45mm
	Standards/Approvals	IEC/EN 61 000-4-2, EN 50 005, IEC/EN 61 000-4-6, IEC/EN 60 529, EN 55 011, DIN 46 228-1/-2/-3/-4, IEC/EN 60 068-2-6, IEC/EN 60255-26, IEC/EN 61 000-4-4, DIN/VDE 0435-303, IEC/EN 60 947-5-1, IEC 60 664-1, UL Subject 94, IEC/EN 61 000-4-5, IEC/EN 61 000-4-3, IEC/EN 60255-1, IEC/EN 60 068-1, IEC/EN 60 715

	選取全部
	品牌 Dold
	Product Type Monitoring Relay
	Function Motor Control
	Electrical Phase 3
	Contact Configuration SPDT
	Mount Type DIN Rail
	Switching Voltage 230V ac
	Terminal Type Screw
	IP Rating IP20, IP40
	Supply AC Voltage 110, 230V ac
	Supply DC Voltage 24 V dc
	Minimum Operating Temperature -20°C
	Contact Current 5A
	Maximum Operating Temperature 55°C
	Series BH 9097
	Height 84mm
	Length 121mm
	Width 45mm
	Standards/Approvals IEC/EN 61 000-4-2, EN 50 005, IEC/EN 61 000-4-6, IEC/EN 60 529, EN 55 011, DIN 46 228-1/-2/-3/-4, IEC/EN 60 068-2-6, IEC/EN 60255-26, IEC/EN 61 000-4-4, DIN/VDE 0435-303, IEC/EN 60 947-5-1, IEC 60 664-1, UL Subject 94, IEC/EN 61 000-4-5, IEC/EN 61 000-4-3, IEC/EN 60255-1, IEC/EN 60 068-1, IEC/EN 60 715

Motor Load Monitor BH 9097

COO (Country of Origin):: DE

Load monitor BH 9097

The load monitor is suitable for monitoring electrical industrial drive systems with variable motor loads.

Features:

The BH 9097 load monitor monitors the actual power consumption of electrical loads

The device can be configured via DIP switches for negative load and overload monitoring or for overload monitoring with preliminary warning level

P1 and P2 settings are calibrated as absolute values; configuration via two rotary switches

Test / reset buttons for simple start-up

Switch state indicator via 2 LEDs

For motors up to 22 KW at 3 AC 400 V, without auxiliary voltage

Up to 40 A without external current transformer

Configurable start-up bridging, configurable response delay

Overall width 45 mm

Load monitor

Using the load monitor allows all machines that are driven by electric motors to be monitored securely. This load monitor can be used for early detection of damage to the bearings or gear, blockage or idling of the screw-conveyors or conveyor belts, as well as V-belt failures or filter blockages, in order to prevent more severe damage or machine failures.

The Telehaase load monitor does not require additional sensors or transducers. It can be used without a current transformer from 230 to 6930 W. Even when operating a frequency inverter, monitoring tasks are completed easily. With all load monitors, start-up bridging and a switching delay can be calibrated.

Standards

IEC 255, EN 60255, VDE 0435 part 303