可享批量折扣
查看批量定價選項小計（1 件）*
TWD748.00
(不含稅)
TWD785.40
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 119 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 - 5 | TWD748.00 |
| 6 - 11 | TWD718.00 |
| 12 + | TWD689.00 |
* 參考價格
- RS庫存編號:
- 667-1295
- 製造零件編號:
- WJ200UM-01-20
- 製造商:
- Igus
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Igus | |
| Product Type | Bearing Block | |
| Series | DryLin W | |
| Carriage Length | 45mm | |
| Carriage Width | 42.5mm | |
| Static Load Rating | 3200N | |
| Carriage Material | Die Cast Zinc | |
| Acceptable Rail Width | 82mm | |
| Carriage Type | Slider | |
| Standards/Approvals | No | |
| 選取全部 | ||
|---|---|---|
品牌 Igus | ||
Product Type Bearing Block | ||
Series DryLin W | ||
Carriage Length 45mm | ||
Carriage Width 42.5mm | ||
Static Load Rating 3200N | ||
Carriage Material Die Cast Zinc | ||
Acceptable Rail Width 82mm | ||
Carriage Type Slider | ||
Standards/Approvals No | ||
- COO (Country of Origin):
- DE
Igus DryLin W Series Bearing Block, 3200N Static Load Rating, 45mm Carriage Length - WJ200UM-01-20
This bearing block provides guided linear motion support for industrial automation and mechanical systems, designed to run on compatible rails and carry carriage loads in constrained assemblies. It is intended for use where a compact slider carriage is required to transmit static loads while integrating with DryLin linear guide setups.
Features and Benefits:
• Static capacity 3200N delivers robust load support for assemblies
• Carriage constructed from die-cast zinc reduces wear under load
• Slider format enables smooth linear guidance with minimal maintenance
• Carriage width 42.5mm offers a narrow footprint for tight installations
• Accepts rails up to 82mm to support a range of guide profiles
• Carriage constructed from die-cast zinc reduces wear under load
• Slider format enables smooth linear guidance with minimal maintenance
• Carriage width 42.5mm offers a narrow footprint for tight installations
• Accepts rails up to 82mm to support a range of guide profiles
Applications
• Suitable for pick-and-place gantry axis in automation cells
• Ideal for mounting sensors or actuators on linear stages
• Used with compact conveyor transfer systems in electronics lines
• Can be used for sliding fixtures in electrical panel assembly
• Ideal for mounting sensors or actuators on linear stages
• Used with compact conveyor transfer systems in electronics lines
• Can be used for sliding fixtures in electrical panel assembly
What carriage length is provided for mounting requirements?
The block uses a 45mm carriage which offers a short mounting base for integrating brackets and fitted components.
What material considerations affect thermal and mechanical behaviour?
The carriage alloy is die-cast zinc, which provides dimensional stability and predictable expansion under temperature variations compared with some plastics.
Which rail widths will this block interface with?
It is compatible with rails having a nominal width of up to 82mm, allowing selection from a range of standard linear guide profiles.
How does the static load rating influence selection for stationary loads?
The 3200N static rating defines the maximum non-moving load the carriage can sustain without exceeding its static capacity, useful for specifying supports in stopped or parked conditions.
相關連結
- Igus Bearing Block WJ200UM-01-16 DryLin® W Series
- Igus Linear Guide Carriage WJ200UM-01-25 drylin W size 25 Series
- Igus Linear Guide Bearing WJRM-01-20 DryLin W Series, 550 N Dynamic Load
- Igus Linear Guide Carriage TW-01-20 drylin T Series
- Igus Linear Guide Bearing WJRM-01-16 DryLin W Series, 400 N Dynamic Load
- Igus Bearing Block WJ200QM-01-06 DryLin W Series, 140 N Dynamic Load
- Igus Linear Guide Carriage TW-01-30 drylin T Series
- Igus Linear Guide Carriage TW-01-25 drylin T Series