Igus Guide Block WJ200QM-01-06-AL DryLin W Series

查看所有Linear Guide Blocks
可享批量折扣
查看批量定價選項

小計（1 件）*

TWD2,449.00

(不含稅)

TWD2,571.45

(含稅)

Add to Basket
選擇或輸入數量
有庫存
  • 100 件準備從其他地點送貨
  • 加上 58 件從 2026年8月21日 起發貨
  • 加上 32 件從 2026年9月04日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位
每單位
1 - 4TWD2,449.00
5 - 9TWD2,352.00
10 +TWD2,301.00

* 參考價格

RS庫存編號:
192-5618
製造零件編號:
WJ200QM-01-06-AL
製造商:
Igus
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

Igus

Product Type

Guide Block

Series

DryLin W

Carriage Length

19mm

Carriage Width

18mm

Static Load Rating

420N

Carriage Type

Slider

Carriage Material

Aluminium

Standards/Approvals

No

COO (Country of Origin):
DE

Igus DryLin R Series Bearing, 20mm Inside Diameter, 45mm Length - RJUM-01-20


This bearing is a precision-engineered component designed to support rotating shafts in industrial systems. It provides a compact, closed-end solution for linear and rotary arrangements where stable support and durable construction are required. The unit is manufactured from lightweight metal and is suited to environments where a low-profile, serviceable bearing is preferred.

Features and Benefits:


• 20mm inside diameter delivers accurate shaft guidance and fit
• 2250N dynamic load capacity supports moving loads reliably
• 15750N static load rating resists heavy stationary forces
• 32mm outside diameter allows straightforward housing integration
• Closed closure type prevents contamination ingress during operation
• 45mm overall length offers compact axial support

Applications


• Suitable for conveyor rollers in automation systems
• Ideal for guide shafts in precision assembly equipment
• Used with motor-driven spindles in small drives
• Can be used for support in electrical actuator assemblies
• Used for shaft guidance in electronic test rigs

What material characteristics affect thermal behaviour during operation?


The housing is made from aluminium which provides good thermal conductivity and helps dissipate heat generated by friction without adding excessive weight.

How does the mounting offset influence alignment in assemblies?


The 16mm base-to-bore centreline sets the offset for bearing placement, enabling predictable alignment relative to mounting surfaces and simplifying bracket design.

Is the component suitable for installations requiring enclosed end protection?


Yes, the closed end configuration ensures the inner elements are covered, reducing exposure to debris in enclosed or semi-enclosed mechanisms.

What performance can be expected under intermittent high loads?


With a high static resistance of 15750N, the unit can tolerate substantial non-moving loads while the dynamic capacity of 2250N governs sustained motion duty.

相關連結

第一時間了解我們的最新產品和優惠

電郵

您在訂閱此郵件時提供的個人信息將根據《隱私政策》進行處理。