Ewellix Makers in Motion LBCD30 D -2LS Bearing with 30 mm ID 47 mm OD 4650 N 3250 N
- RS庫存編號:
- 284-9683
- 製造零件編號:
- LBCD30 D -2LS
- 製造商:
- Ewellix Makers in Motion
小計（1 件）*
TWD3,135.00
(不含稅)
TWD3,291.75
(含稅)
庫存資訊目前無法存取 - 請稍後再回來查看
單位 | 每單位 |
|---|---|
| 1 + | TWD3,135.00 |
* 參考價格
- RS庫存編號:
- 284-9683
- 製造零件編號:
- LBCD30 D -2LS
- 製造商:
- Ewellix Makers in Motion
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Ewellix Makers in Motion | |
| Product Type | Bearing | |
| Outside Diameter | 47 mm | |
| Length | 68mm | |
| Inside Diameter | 30 mm | |
| End Type | Sealed | |
| Dynamic Load Rating | 4650N | |
| Material | Steel | |
| Closure Type | Closed | |
| Base to Bore Centerline | 23.5mm | |
| Static Load Rating | 3250N | |
| Standards/Approvals | No | |
| Series | LBCD | |
| 選取全部 | ||
|---|---|---|
品牌 Ewellix Makers in Motion | ||
Product Type Bearing | ||
Outside Diameter 47 mm | ||
Length 68mm | ||
Inside Diameter 30 mm | ||
End Type Sealed | ||
Dynamic Load Rating 4650N | ||
Material Steel | ||
Closure Type Closed | ||
Base to Bore Centerline 23.5mm | ||
Static Load Rating 3250N | ||
Standards/Approvals No | ||
Series LBCD | ||
- COO (Country of Origin):
- DE
Linear bearings, LBCD
Standard linear bearings LBCD from ISO range 3
Automatic self-alignment of max. ±30 angular minutes
Non-parallels between drive shaft and housing bore, produced by shaft deflection or assembly or manufacturing inaccuracies, can be compensated
Misalignments of drive shafts with one another cannot be compensated
Angled pivoting of bearings is possible thanks to special outer contour of runner plates
Pivotable cage reduced in outer diameter
Bearings fitted in housing and sealing or cover discs always central to drive shaft
All other features of LBCR linear bearings are the same for the angle-adjustable LBCD design
LBCD linear bearings must be secured in the axial plane
SKF Linear Ball Bushings & Sets
Closed ball bushings and plain bearings for XY positioning, pick and place applications and precision linear motion systems.,Plain bearings to be used in heavy shock, vibration, high acceleration or high speed situations which are unsuitable for linear ball bearings.,Note that higher frictional forces must be expected with linear plain bearings.,Ball bushings comprise a cage, in which the balls are guided, along with the raceway segments and integral seals,Further axial securing is often unnecessary when linear ball bearings and linear plain bearings are pressed into a J7 or J6 tolerance hole.
相關連結
- Ewellix Makers in Motion Bearing Unit LUNE12 D-2LS LUNE Series
- Ewellix Makers in Motion Bearing Unit LUHR 25-2LS LUHR Series
- Ewellix Makers in Motion Bearing Unit LUHR 16-2LS LUNE Series
- Ewellix Makers in Motion Bearing Unit LUHR 20-2LS LUNE Series
- Ewellix Makers in Motion Bearing Unit LUHR 12-2LS LUHR Series
- Ewellix Makers in Motion Bearing Unit LUHR 30-2LS LUNE Series
- Ewellix Makers in Motion LBCR25 D-2LS Bearing with 25 mm ID 40 mm OD 3350 N 3350 N
- Ewellix Makers in Motion LBCR 5-2LS Bearing with 5 mm ID 12 mm OD 280 N 210 N