Ewellix Bearing Unit LUHR 12-2LS
- RS庫存編號:
- 284-9425
- 製造零件編號:
- LUHR 12-2LS
- 製造商:
- Ewellix Makers in Motion
可享批量折扣
小計（1 件）*
TWD2,454.00
(不含稅)
TWD2,576.70
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 4 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 - 5 | TWD2,454.00 |
| 6 - 11 | TWD2,356.00 |
| 12 + | TWD2,258.00 |
* 參考價格
- RS庫存編號:
- 284-9425
- 製造零件編號:
- LUHR 12-2LS
- 製造商:
- Ewellix Makers in Motion
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Ewellix Makers in Motion | |
| Bearing Inside Diameter | 12mm | |
| Bearing Outside Diameter | 19mm | |
| Bearing Unit Type | Linear Ball Bearing Unit | |
| For Bearing Type | Closed | |
| Housing Dimensions | 40 x 28 x 33mm | |
| Dynamic Load Rating | 695N | |
| Static Load Rating | 510N | |
| Housing Width | 28mm | |
| Housing Height | 33mm | |
| Housing Length | 40mm | |
| 選取全部 | ||
|---|---|---|
品牌 Ewellix Makers in Motion | ||
Bearing Inside Diameter 12mm | ||
Bearing Outside Diameter 19mm | ||
Bearing Unit Type Linear Ball Bearing Unit | ||
For Bearing Type Closed | ||
Housing Dimensions 40 x 28 x 33mm | ||
Dynamic Load Rating 695N | ||
Static Load Rating 510N | ||
Housing Width 28mm | ||
Housing Height 33mm | ||
Housing Length 40mm | ||
不適用
- COO (Country of Origin):
- DE
LUHR Ball Bushes Block Sets - Closed
Supplied with
LBBR linear bearing, with integral seals (2LS models), and have extruded aluminium alloy housing.
SKF Linear Ball Bushings & Sets
Closed ball bushings and plain bearings for XY positioning, pick and place applications and precision linear motion systems.,Plain bearings to be used in heavy shock, vibration, high acceleration or high speed situations which are unsuitable for linear ball bearings.,Note that higher frictional forces must be expected with linear plain bearings.,Ball bushings comprise a cage, in which the balls are guided, along with the raceway segments and integral seals,Further axial securing is often unnecessary when linear ball bearings and linear plain bearings are pressed into a J7 or J6 tolerance hole.