Honeywell LS Series Roller Lever Limit Switch, SPDT, IP67, Die Cast Zinc Housing, 240V ac, 6A

RS庫存編號:: 311-2112
製造零件編號:: 1LS244-4C
製造商:: Honeywell

Honeywell LS Series Roller Lever Limit Switch, SPDT, IP67, Die Cast Zinc Housing, 240V ac, 6A

小計（1 件）*

TWD13,335.00

(不含稅)

TWD14,001.75

訂單超過 $1,300.00 免費送貨

有庫存

7 件準備從其他地點送貨
加上 15 件從 2026年5月12日起發貨
加上 74 件從 2026年6月08日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD13,335.00

* 參考價格

RS庫存編號:: 311-2112
製造零件編號:: 1LS244-4C
製造商:: Honeywell

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Honeywell
	Actuator Type	Roller Lever
	Product Type	Limit Switch
	Contact Configuration	SPDT
	IP Rating	IP67
	Housing Material	Die Cast Zinc
	Contact Type	Double Break
	Switching Current	6A
	Terminal Type	M20
	Series	LS
	Switching AC Voltage	240V ac
	Minimum Operating Temperature	-29°C
	Switching DC Voltage	250V dc
	Maximum Operating Temperature	150°C
	Length	111.4mm
	Standards/Approvals	CE/EN/IEC
	Width	40mm
	Depth	58.5mm
	Hazardous Area Certification	NO
	Conduit Entry	20 mm
	Mounting Orientation	Panel

	選取全部
	品牌 Honeywell
	Actuator Type Roller Lever
	Product Type Limit Switch
	Contact Configuration SPDT
	IP Rating IP67
	Housing Material Die Cast Zinc
	Contact Type Double Break
	Switching Current 6A
	Terminal Type M20
	Series LS
	Switching AC Voltage 240V ac
	Minimum Operating Temperature -29°C
	Switching DC Voltage 250V dc
	Maximum Operating Temperature 150°C
	Length 111.4mm
	Standards/Approvals CE/EN/IEC
	Width 40mm
	Depth 58.5mm
	Hazardous Area Certification NO
	Conduit Entry 20 mm
	Mounting Orientation Panel

登入下載 CAD 模型

COO (Country of Origin):: GB

Honeywell Series LS Limit Switch, 20mm Conduit Entry, Roller Lever Actuator - 1LS244-4C

This limit switch provides a Compact mechanical sensing solution for position detection in industrial control systems. Designed for panel mounting with a roller lever actuator, it offers reliable signal switching for automation, electronics and electrical installations where robust environmental protection is required.

Features and Benefits:

• SPDT double-break contacts for clear state separation and reduced contact wear
• Rated switching at 240V AC and 6A to handle typical control-circuit loads
• Die-cast zinc housing for Durable mechanical protection in industrial settings
• IP67 ingress rating enabling operation in wet or dusty conditions
• Operating range from −29 °C to 150 °C for elevated-temperature environments
• M20 Terminal with 20mm conduit entry for secure cable termination

Applications

• Suitable for conveyor end-of-travel detection in manufacturing lines
• Ideal for position sensing on automated valve actuators
• Used for safety interlocks on electrical enclosures in harsh settings
• Can be used for limit detection on machine-tool slides and carriages

How is the device mounted and connected in a control panel?

It is designed for panel-orientation mounting and uses an M20 Terminal with a 20mm conduit entry for conduit or gland attachment.

What electrical switching characteristics should be considered for integration?

The switch provides single-pole double-throw operation with double-break contacts and is specified for switching up to 240V AC at 6 A and up to 250V DC.

What materials and protections ensure suitability for demanding sites?

The enclosure is formed from die-cast zinc and the assembly meets IP67 protection for resistance to dust ingress and temporary immersion.

Which standards apply to its design approvals?

It is manufactured to comply with CE/EN/IEC standards relevant to such switching devices.

Approvals

UL; CSA

Standards

EN60947-5-1, IEC947-5-1