Honeywell Technologies LS Series Roller Lever Limit Switch, SPDT, IP67, Die Cast Zinc Housing, 240V, 10A

RS庫存編號:: 217-7110
製造零件編號:: 1LS244-4PG
製造商:: Honeywell Technologies

Honeywell Technologies LS Series Roller Lever Limit Switch, SPDT, IP67, Die Cast Zinc Housing, 240V, 10A

小計（1 件）*

TWD16,388.00

(不含稅)

TWD17,207.40

訂單超過 $1,300.00 免費送貨

有庫存

45 件準備從其他地點送貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD16,388.00

* 參考價格

RS庫存編號:: 217-7110
製造零件編號:: 1LS244-4PG
製造商:: Honeywell Technologies

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Honeywell Technologies
	Actuator Type	Roller Lever
	Product Type	Limit Switch
	IP Rating	IP67
	Contact Configuration	SPDT
	Housing Material	Die Cast Zinc
	Contact Type	Snap Action
	Terminal Type	Terminal Block
	Switching Current	10A
	Series	LS
	Switching DC Voltage	550V
	Minimum Operating Temperature	-29°C
	Switching AC Voltage	240V
	Maximum Operating Temperature	120°C
	Length	38.1mm
	Standards/Approvals	UL file 12252, IEC60947-5-4, EN60947-5-41, CSA file 57325, CE
	Hazardous Area Certification	No
	Operating Force	0.51N
	Mounting Orientation	Panel
	Conduit Entry	PG13.5

	選取全部
	品牌 Honeywell Technologies
	Actuator Type Roller Lever
	Product Type Limit Switch
	IP Rating IP67
	Contact Configuration SPDT
	Housing Material Die Cast Zinc
	Contact Type Snap Action
	Terminal Type Terminal Block
	Switching Current 10A
	Series LS
	Switching DC Voltage 550V
	Minimum Operating Temperature -29°C
	Switching AC Voltage 240V
	Maximum Operating Temperature 120°C
	Length 38.1mm
	Standards/Approvals UL file 12252, IEC60947-5-4, EN60947-5-41, CSA file 57325, CE
	Hazardous Area Certification No
	Operating Force 0.51N
	Mounting Orientation Panel
	Conduit Entry PG13.5

Honeywell Series LS Limit Switch, Side Rotary Actuator Type, Die Cast Zinc Housing - 1LS244-4PG

This limit switch provides positional detection and circuit switching for industrial automation and control systems. It is a compact, side-actuated device designed for demanding environments, offering electrical switching capability for both AC and DC circuits while maintaining ingress protection for use where dust and water resistance are required.

Features and Benefits:

• IP67 ingress protection enables use in wet or dusty locations
• SPDT snap‑action contacts deliver positive, fast switching
• Rated switching current of 10A supports medium‑power loads
• AC switching up to 480V and DC switching up to 550V suits varied supplies
• Low operating force 0.51 N reduces wear on actuating mechanisms
• Terminal Block with NPT conduit entry simplifies field wiring

Applications

• Suitable for limit sensing on conveyor end‑stops
• Ideal for position feedback on industrial valves and actuators
• Used with motor control panels for safety interlocks
• Can be used for door‑open/closed detection in enclosures
• Suitable for packaging machinery position monitoring

What materials make the enclosure Durable for industrial use?

The housing is die‑cast zinc, providing mechanical robustness and resistance to impact in factory settings.

How does the actuator Interface with mounting or linkage arrangements?

The unit uses a side rotary actuator type, allowing shaft or lever linkage to engage at a right angle to the switch body.

Which standards or approvals does it meet for safety and interoperability?

It conforms to IEC 60947‑5‑4 and EN 60947‑5‑41 and is listed under UL file 12252 and CSA file 57325 for recognised industrial use.

What Terminal and conduit options are available for electrical entry?

It employs a Terminal Block termination and accepts 0.5 to 14 NPT conduit entry for secure cable routing.

What thermal limits should be observed during installation?

The operating temperature range spans from −30 °C to 150 °C, requiring attention to ambient and enclosure temperatures during placement.