Honeywell GLC Series Plunger Limit Switch, 1 NC/1 NO, IP66, Die Cast Zinc Housing, 240V ac, 6A

RS庫存編號:: 308-1793
Distrelec 貨號:: 136-30-548
製造零件編號:: GLCB01B
製造商:: Honeywell

Honeywell GLC Series Plunger Limit Switch, 1 NC/1 NO, IP66, Die Cast Zinc Housing, 240V ac, 6A

小計（1 件）*

TWD3,334.00

(不含稅)

TWD3,500.70

訂單超過 $1,300.00 免費送貨

有庫存

加上 49 件從 2026年5月04日起發貨
加上 11 件從 2026年5月06日起發貨
加上 48 件從 2026年5月11日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD3,334.00

* 參考價格

RS庫存編號:: 308-1793
Distrelec 貨號:: 136-30-548
製造零件編號:: GLCB01B
製造商:: Honeywell

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Honeywell
	Product Type	Limit Switch
	Actuator Type	Plunger
	Contact Configuration	1 NC/1 NO
	IP Rating	IP66
	Housing Material	Die Cast Zinc
	Contact Type	Snap Action
	Switching Current	6A
	Series	GLC
	Switching AC Voltage	240V ac
	Minimum Operating Temperature	-40°C
	Switching DC Voltage	250V dc
	Maximum Operating Temperature	85°C
	Width	30.5mm
	Standards/Approvals	UL, CSA, CE, CCC
	Length	68.5mm
	Depth	26.35mm
	Hazardous Area Certification	NO
	Mechanical Life	10000000Cycles
	Conduit Entry	PG13.5
	Operating Force	16N

	選取全部
	品牌 Honeywell
	Product Type Limit Switch
	Actuator Type Plunger
	Contact Configuration 1 NC/1 NO
	IP Rating IP66
	Housing Material Die Cast Zinc
	Contact Type Snap Action
	Switching Current 6A
	Series GLC
	Switching AC Voltage 240V ac
	Minimum Operating Temperature -40°C
	Switching DC Voltage 250V dc
	Maximum Operating Temperature 85°C
	Width 30.5mm
	Standards/Approvals UL, CSA, CE, CCC
	Length 68.5mm
	Depth 26.35mm
	Hazardous Area Certification NO
	Mechanical Life 10000000Cycles
	Conduit Entry PG13.5
	Operating Force 16N

登入下載 CAD 模型

Honeywell GLC Series Limit Switch, 240V AC Switching Voltage, 6A Switching Current - GLCB01B

This limit switch is a mechanically actuated device designed to detect position changes and provide discrete electrical switching in industrial control systems. It is built for demanding environments and offers a Compact footprint with a plunger actuator that converts linear motion into a snap‑action contact change. The product is suitable for integration into automation, electrical and mechanical assemblies where robust end‑of‑travel signalling is required.

Features and Benefits:

• Snap‑action contacts provide quick make‑and‑break switching for precise control
• 1NC and 1NO configuration enables both normally closed and open circuits
• IP66 ingress protection allows operation in wet and dusty environments
• Electrostatic epoxy‑coated zinc housing resists corrosion in harsh locations
• 16 N operating force ensures consistent actuation response under load
• Rated for 240V AC at 6A to handle common control voltages and currents

Applications

• Suitable for conveyor end‑of‑travel detection in production lines
• Ideal for limit sensing on industrial presses and actuators
• Used with motor starters for safety interlock monitoring
• Can be used for position feedback on packaging machinery

What electrical switching capability can I expect for control circuits?

It switches up to 240V AC and carries a maximum current of 6 A, accommodating typical control and signalling loads.

How does the device cope with temperature extremes on‑site?

The unit operates across a range from −40 to 85 °C, allowing use in cold‑store to warm‑process conditions without performance degradation.

What mechanical endurance does it offer for high‑cycle applications?

Mechanical life is rated at 10,000,000 cycles, making it appropriate for frequent actuation scenarios.

Which installation Interface does it provide for wiring entry?

The enclosure accepts a PG13.5 conduit entry for secure cable or conduit connection.

Are there recognised standards that the device meets for industrial deployment?

It holds approvals under UL, CSA, CE and CCC, supporting use where those certifications are required.

Approvals

UL; CSA

Standards

EN 50047