Telemecanique Sensors XCS Series Rotary Safety Limit Switch, 1 NO/2 NC, IP66, IP67, Plastic Housing, 240V ac, 1.5A

RS庫存編號:: 198-560
製造零件編號:: XCSD3919P20
製造商:: Telemecanique Sensors

Telemecanique Sensors XCS Series Rotary Safety Limit Switch, 1 NO/2 NC, IP66, IP67, Plastic Housing, 240V ac, 1.5A

小計（1 件）*

TWD4,430.00

(不含稅)

TWD4,651.50

訂單超過 $1,300.00 免費送貨

有限的庫存

71 件準備從其他地點送貨
加上 45 件從 2026年10月22日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD4,430.00

* 參考價格

RS庫存編號:: 198-560
製造零件編號:: XCSD3919P20
製造商:: Telemecanique Sensors

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Telemecanique Sensors
	Product Type	Safety Limit Switch
	Actuator Type	Rotary
	Contact Configuration	1 NO/2 NC
	IP Rating	IP66, IP67
	Housing Material	Plastic
	Contact Type	Snap Action
	Terminal Type	Terminal
	Switching Current	1.5A
	Series	XCS
	Switching AC Voltage	240V ac
	Switching DC Voltage	250V dc
	Minimum Operating Temperature	-25°C
	Maximum Operating Temperature	70°C
	Standards/Approvals	CE, CSA, EN, IEC, RoHS, UL
	Depth	35mm
	Length	122mm
	Width	34mm
	Hazardous Area Certification	No
	Mechanical Life	10000000Cycles
	Operating Force	0.25mN
	Conduit Entry	M20 x 1.5

	選取全部
	品牌 Telemecanique Sensors
	Product Type Safety Limit Switch
	Actuator Type Rotary
	Contact Configuration 1 NO/2 NC
	IP Rating IP66, IP67
	Housing Material Plastic
	Contact Type Snap Action
	Terminal Type Terminal
	Switching Current 1.5A
	Series XCS
	Switching AC Voltage 240V ac
	Switching DC Voltage 250V dc
	Minimum Operating Temperature -25°C
	Maximum Operating Temperature 70°C
	Standards/Approvals CE, CSA, EN, IEC, RoHS, UL
	Depth 35mm
	Length 122mm
	Width 34mm
	Hazardous Area Certification No
	Mechanical Life 10000000Cycles
	Operating Force 0.25mN
	Conduit Entry M20 x 1.5

登入下載 CAD 模型

豁免

Telemecanique Sensors XCSD Series Safety Limit Switch, IP66/IP67, 10000000 Cycles Mechanical Life - XCSD3919P20

This safety limit switch is a rotary-actuated device designed to detect position and interrupt circuits in industrial control systems. Housed in a plastic enclosure with ingress protection suitable for harsh environments, it serves as a Compact Interface between moving machinery and safety or control circuits. It supports both AC and DC switching and is intended for installation where precise mechanical signalling and low actuation effort are required.

Features and Benefits:

• Snap-action contacts deliver Rapid state change for clear signalling
• Contact arrangement provides one normally open and two normally closed contacts
• Low actuation force of 0.25mN reduces wear on mechanical linkages
• Rated for 250V DC and 240V AC switching to cover diverse loads
• Conduit entry M20x1.5 simplifies cable gland fitting and sealing
• Mechanical endurance of 10000000 cycles ensures long service intervals

Applications

• Suitable for door and guard position monitoring in automated cells
• Ideal for conveyor end-of-travel detection in material handling
• Used with pneumatic actuators for machine safety interlocks
• Can be used for position feedback on packaging equipment

What environmental protection does it provide for washdown or dusty areas?

The enclosure meets IP66 and IP67 classifications, providing dust-tight protection and temporary immersion resistance when correctly installed.

How is the device connected electrically in control panels?

It uses screw terminals configured for a single NO and two NC contacts, allowing direct wiring into control or safety circuits.

What temperature range can it operate within?

It functions between -25°C and 70°C, accommodating typical industrial ambient conditions.

Which standards cover its conformity and safety assessment?

It complies with CE, CSA, EN, IEC, RoHS and UL approvals relevant to industrial switching components.

What mounting footprint or size constraints should installers expect?

The switch is Compact with overall dimensions 34mm width, 35mm depth and 122mm length for tight panel or actuator mounting.