Telemecanique Sensors XCMH Series Plunger Limit Switch, 1 NO/1 NC, IP66, IP67, Plastic Housing, 240V ac, 750mA

RS庫存編號:: 194-148
製造零件編號:: XCMH2110L1
製造商:: Telemecanique Sensors

Telemecanique Sensors XCMH Series Plunger Limit Switch, 1 NO/1 NC, IP66, IP67, Plastic Housing, 240V ac, 750mA

小計（1 件）*

TWD1,754.00

(不含稅)

TWD1,841.70

訂單超過 $1,300.00 免費送貨

有庫存

10 件準備從其他地點送貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD1,754.00

* 參考價格

RS庫存編號:: 194-148
製造零件編號:: XCMH2110L1
製造商:: Telemecanique Sensors

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Telemecanique Sensors
	Actuator Type	Plunger
	Product Type	Limit Switch
	Contact Configuration	1 NO/1 NC
	IP Rating	IP66, IP67
	Housing Material	Plastic
	Contact Type	Snap Action
	Switching Current	750mA
	Terminal Type	Cable
	Series	XCMH
	Switching AC Voltage	240V ac
	Switching DC Voltage	250V dc
	Minimum Operating Temperature	-25°C
	Maximum Operating Temperature	70°C
	Length	16mm
	Depth	60mm
	Standards/Approvals	CSA C22.2 No 14, IEC 60204-1, IEC 60947-5-1, UL 508
	Width	30mm
	Hazardous Area Certification	No
	Operating Force	42.5N
	Mechanical Life	5000000Cycles

	選取全部
	品牌 Telemecanique Sensors
	Actuator Type Plunger
	Product Type Limit Switch
	Contact Configuration 1 NO/1 NC
	IP Rating IP66, IP67
	Housing Material Plastic
	Contact Type Snap Action
	Switching Current 750mA
	Terminal Type Cable
	Series XCMH
	Switching AC Voltage 240V ac
	Switching DC Voltage 250V dc
	Minimum Operating Temperature -25°C
	Maximum Operating Temperature 70°C
	Length 16mm
	Depth 60mm
	Standards/Approvals CSA C22.2 No 14, IEC 60204-1, IEC 60947-5-1, UL 508
	Width 30mm
	Hazardous Area Certification No
	Operating Force 42.5N
	Mechanical Life 5000000Cycles

Datasheet - XCMH2110L1

登入下載 CAD 模型

COO (Country of Origin):: ID

Telemecanique Sensors XCMH Series Limit Switch, IP66/IP67 Ingress Protection, 0.75A Switching Current - XCMH2110L1

This limit switch provides electro-mechanical position sensing for industrial machinery where a compact, robust actuation device is required. Fitted with a plunger actuator and designed for use outside hazardous zones, it offers a straightforward means to detect and break or make circuits in control systems. The unit connects via a fixed cable and complies with recognised electrical machinery safety standards.

Features and Benefits:

• 1 NO/1 NC snap-action contact for precise state change
• 42.5N operating force enabling consistent actuation response
• 0.75A switching current suitable for control signal circuits
• Rated for 250V DC and 240V AC accommodating varied supplies
• Mechanical endurance of 5,000,000 cycles reducing maintenance intervals
• IP66, IP67 waterproof plastic housing for washdown and dust protection

Applications

• Suitable for end-of-travel detection on conveyor stops
• Ideal for position sensing on packaging machinery
• Used with light-duty motor starters and control relays
• Can be used for gate and access interlocks in factories
• Suitable for repeated cycling in assembly lines

What terminals are provided for electrical connection?

A permanently attached cable serves as the terminal method, eliminating screw terminals and simplifying installation where cable routing is required.

What climatic range can it operate within?

It functions across an ambient span from -25°C to 70°C, allowing use in cold storage peripheral equipment and warm plant areas.

Which compliance standards govern its electrical and mechanical safety?

It meets CSA C22.2 No. 14, IEC 60204-1, IEC 60947-5-1 and UL 508 requirements for industrial switchgear applications.

What housing material and protection level suit harsh environments?

The enclosure is moulded plastic and carries ingress protection to IP66 and IP67, permitting temporary immersion and high-pressure washdown conditions.