Telemecanique Sensors XCMH Series Plunger Limit Switch, 1 NO/1 NC, IP67, IP66, Plastic Housing, 240V ac, 0.75A

RS庫存編號:: 194-129
製造零件編號:: XCMH211AL1
製造商:: Telemecanique Sensors

Telemecanique Sensors XCMH Series Plunger Limit Switch, 1 NO/1 NC, IP67, IP66, Plastic Housing, 240V ac, 0.75A

小計（1 件）*

TWD2,181.00

(不含稅)

TWD2,290.05

訂單超過 $1,300.00 免費送貨

有庫存

2 件準備從其他地點送貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD2,181.00

* 參考價格

RS庫存編號:: 194-129
製造零件編號:: XCMH211AL1
製造商:: Telemecanique Sensors

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Telemecanique Sensors
	Actuator Type	Plunger
	Product Type	Limit Switch
	IP Rating	IP67, IP66
	Contact Configuration	1 NO/1 NC
	Housing Material	Plastic
	Contact Type	Snap Action
	Terminal Type	Cable
	Switching Current	0.75A
	Series	XCMH
	Switching AC Voltage	240V ac
	Switching DC Voltage	300V dc
	Minimum Operating Temperature	-25°C
	Maximum Operating Temperature	70°C
	Depth	94mm
	Length	16mm
	Standards/Approvals	UL 508 IEC 60947-5-1 CSA C22.2 No 14 IEC 60204-1
	Width	30mm
	Hazardous Area Certification	No
	Operating Force	0.5N
	Conduit Entry	M20
	Mechanical Life	5000000Cycles

	選取全部
	品牌 Telemecanique Sensors
	Actuator Type Plunger
	Product Type Limit Switch
	IP Rating IP67, IP66
	Contact Configuration 1 NO/1 NC
	Housing Material Plastic
	Contact Type Snap Action
	Terminal Type Cable
	Switching Current 0.75A
	Series XCMH
	Switching AC Voltage 240V ac
	Switching DC Voltage 300V dc
	Minimum Operating Temperature -25°C
	Maximum Operating Temperature 70°C
	Depth 94mm
	Length 16mm
	Standards/Approvals UL 508 IEC 60947-5-1 CSA C22.2 No 14 IEC 60204-1
	Width 30mm
	Hazardous Area Certification No
	Operating Force 0.5N
	Conduit Entry M20
	Mechanical Life 5000000Cycles

Datasheet - XCMH211AL1

登入下載 CAD 模型

COO (Country of Origin):: ID

Telemecanique Sensors XCMH Series Limit Switch, IP67/IP66 Ingress Protection, 0.75A Switching Current - XCMH211AL1

This limit switch is a plunger-actuated industrial sensor designed to detect mechanical position changes in demanding environments. It offers snap-action contacts and a cable terminal for straightforward wiring, housed in a plastic enclosure that provides ingress protection suitable for exposed installations. The device operates across a wide temperature range and is intended for applications requiring frequent cycling and defined switching behaviour.

Features and Benefits:

• Snap-action contact delivers fast, repeatable electrical transition
• 0.5N operating force enables sensitive actuation with low trigger effort
• Rated switching up to 300V DC for high-voltage DC circuits
• Maximum switching current 0.75A supports moderate load switching
• Mechanical endurance of 5,000,000 cycles for continuous-duty applications
• Conduit entry M20 allows standard cable gland installation

Applications

• Suitable for conveyor end-of-travel detection in factories
• Ideal for interlock sensing on machine guards and doors
• Used with DC control circuits requiring 300V DC switching
• Can be used for position feedback in automated packaging lines
• Appropriate for assembly-line stations with high actuation counts

What contact arrangement does it provide for control logic?

It features one normally open and one normally closed contact to enable both make and break signalling in control circuits.

How does the enclosure handle wet or dusty conditions?

The housing meets IP66 and IP67 ingress levels, providing protection against heavy spray and temporary immersion when properly installed.

What temperature extremes can it withstand during operation?

It operates reliably from -25°C up to 70°C, accommodating cold storage and warm plant-floor environments.

What standards govern its electrical and safety characteristics?

It is manufactured to conform with UL508, IEC 60947-5-1, CSA C22.2 No 14 and IEC 60204-1 requirements.