Telemecanique Sensors XCMH Series Roller Lever Limit Switch, 1 NO/1 NC, IP66, IP67, Plastic Housing, 240V ac, 0.75A

RS庫存編號:: 194-145
製造零件編號:: XCMH2115L1
製造商:: Telemecanique Sensors

Telemecanique Sensors XCMH Series Roller Lever Limit Switch, 1 NO/1 NC, IP66, IP67, Plastic Housing, 240V ac, 0.75A

小計（1 件）*

TWD1,951.00

(不含稅)

TWD2,048.55

訂單超過 $1,300.00 免費送貨

有庫存

加上 69 件從 2026年10月05日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD1,951.00

* 參考價格

RS庫存編號:: 194-145
製造零件編號:: XCMH2115L1
製造商:: Telemecanique Sensors

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Telemecanique Sensors
	Product Type	Limit Switch
	Actuator Type	Roller Lever
	Contact Configuration	1 NO/1 NC
	IP Rating	IP66, IP67
	Housing Material	Plastic
	Contact Type	Snap Action
	Switching Current	0.75A
	Terminal Type	Cable
	Series	XCMH
	Switching DC Voltage	250V dc
	Minimum Operating Temperature	-25°C
	Switching AC Voltage	240V ac
	Maximum Operating Temperature	70°C
	Width	30mm
	Depth	94mm
	Standards/Approvals	UL 508, CSA C22.2 No 14, IEC 60204-1, IEC 60947-5-1
	Length	16mm
	Hazardous Area Certification	No
	Mechanical Life	5000000Cycles
	Operating Force	0.5N

	選取全部
	品牌 Telemecanique Sensors
	Product Type Limit Switch
	Actuator Type Roller Lever
	Contact Configuration 1 NO/1 NC
	IP Rating IP66, IP67
	Housing Material Plastic
	Contact Type Snap Action
	Switching Current 0.75A
	Terminal Type Cable
	Series XCMH
	Switching DC Voltage 250V dc
	Minimum Operating Temperature -25°C
	Switching AC Voltage 240V ac
	Maximum Operating Temperature 70°C
	Width 30mm
	Depth 94mm
	Standards/Approvals UL 508, CSA C22.2 No 14, IEC 60204-1, IEC 60947-5-1
	Length 16mm
	Hazardous Area Certification No
	Mechanical Life 5000000Cycles
	Operating Force 0.5N

Datasheet - XCMH2115L1

登入下載 CAD 模型

COO (Country of Origin):: ID

Telemecanique Sensors XCMH Series Limit Switch, IP66/ IP67 Ingress Protection, 0.5N Operating Force - XCMH2115L1

This limit switch provides a compact, electromechanical solution for detecting position and end-of-travel in industrial machinery. It uses a roller lever actuator and a snap-action contact arrangement to deliver rapid electrical changeover for control circuits. The device is intended for use where sealed protection and straightforward wiring are required.

Features and Benefits:

• Snap-action contacts reduce contact bounce for accurate switching
• 0.5N actuation force allows sensitive mechanical response
• Rated for 250V DC and 240V AC to suit diverse control voltages
• 0.75A switching current supports low-power signalling loads
• Durable for 5,000,000 cycles to lower maintenance intervals
• Cable termination simplifies installation in confined spaces

Applications

• Suitable for conveyor end-of-travel detection in factories
• Ideal for gating mechanisms requiring sensitive actuation
• Used with packaging equipment for product-present sensing
• Can be used for limit detection on automated feeders
• Suitable for positioning verification in material-handling systems

What environmental protection does it provide for washdown or dust?

The enclosure meets IP66 and IP67 ratings, offering dust-tight sealing and protection against powerful water jets and temporary immersion.

How does the contact configuration support control logic?

It offers one normally open and one normally closed contact arranged for instantaneous changeover, enabling both make and break signalling in safety or control circuits.

What materials and temperature range are appropriate for installation?

The switch uses a plastic enclosure and operates between -25°C and 70°C, allowing use in many standard indoor and sheltered outdoor industrial settings.

Which standards does it conform to for electrical safety and machinery use?

Certification covers UL 508, CSA C22.2 No 14, IEC 60204-1 and IEC 60947-5-1 to align with recognised industrial electrical requirements.