Delta-Mobrey VLS Series Solids Level Switch Level Switch, Vertical, Horizontal, ATEX-Rated, Non-Asbestos Sheet, Housing

查看所有Level Sensors

小計（1 件）*

TWD29,091.00

(不含稅)

TWD30,545.55

(含稅)

Add to Basket
選擇或輸入數量
庫存資訊目前無法存取 - 請稍後再回來查看
單位
每單位
1 +TWD29,091.00

* 參考價格

RS庫存編號:
511-5157
製造零件編號:
VLSKB131Z
製造商:
Delta-Mobrey
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

Delta-Mobrey

Device Type

Solids Level Switch

Product Type

Level Switch

Mount Type

Vertical, Horizontal

Housing Material

Aluminium Alloy

Cable Length

235mm

Minimum Operating Temperature

-20°C

Maximum Operating Temperature

110°C

Maximum DC Voltage

55V dc

Maximum AC Voltage

265V ac

Maximum Current

8A

Maximum Pressure

10bar

Gasket Material

Non-Asbestos Sheet

Standards/Approvals

No

Hazardous Area Certification

ATEX

Series

VLS

豁免

Mobrey Level Switch


The Mobrey vibrating rod level switch is the perfect solution for single-point level switching in free-flowing solids across a wide density range, from fine powders to grains. A single rod design provides the solution to tuning forks which may become blocked or bridged. The vibration rod is energized and kept in resonance by an electronic circuit. When covered by material, the damping of the vibration is detected by the electronics which initiate the switching of the output relay after a built-in programmable time delay.

Supplied with:

User manual, 2 – 3-pole terminal blocks, 1in sealing, 2 – Pg 16 cable glands.

How do you carry out an installation?

Requiring only a 1in BSP/NPT socket, either on the top or in the sidewall of the silo, the unit is easy to install and simple to the commission.

Prior to installation, it is advised to check the switching function for proper adjustment on a sample quantity of material. The unit may not work with mediums within specified density range but having a very large size of granules or extremely little friction.

WARNING!

Handle device with great care, especially the sensing probe. Any impact on the sensing probe can ruin its resonance system.

A protective shield should be installed if the probe is exposed to falling material or an excessive mechanical load.

Features and Benefits


Standard model with 1 x SPDT alarm relay

It has an operating voltage of 20VAC/DC to 255VAC/DC

Housing standard is aluminium alloy with powder coated

Standard R 1-1/2in BSPT mounting connection

Free-flowing solids and it eliminates the clogging and ridging problems associated with forks

Rod design prevents product bridging

External LED switch status indication display and the probe is maintenance free

Relay output

Compact and rugged design and relay output

Applications


It is designed to provide high or low-level switching in silos or bins containing free-flowing powders and granular materials such as carbon black, sugar, grain, cement, lime and sand with a material bulk density on 50 kg/m3 or more

Vibrating Liquid/Solid

Level Probes - Squings

Certifications


ATEX II 1/2 D

IP67 rated

相關連結