MEAN WELL LED Driver, 6.6/12 V Output, 25.2 W Output, 2.1 A
- RS庫存編號:
- 764-7209
- Distrelec 貨號:
- 303-72-441
- 製造零件編號:
- LPF-25-12
- 製造商:
- MEAN WELL
此圖片僅供參考,請參閲產品詳細資訊及規格
可享批量折扣
小計(1 件)*
TWD697.00
(不含稅)
TWD731.85
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 加上 38 件從 2026年2月23日 起發貨
**需要更多嗎?**輸入您需要的數量,然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 - 4 | TWD697.00 |
| 5 - 9 | TWD676.00 |
| 10 - 24 | TWD655.00 |
| 25 - 49 | TWD642.00 |
| 50 + | TWD629.00 |
* 參考價格
- RS庫存編號:
- 764-7209
- Distrelec 貨號:
- 303-72-441
- 製造零件編號:
- LPF-25-12
- 製造商:
- MEAN WELL
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | MEAN WELL | |
| Output Voltage | 6.6/12 V | |
| Product Type | LED Driver | |
| Maximum Output Power | 25.2W | |
| Input Voltage | 127 → 431 V dc, 90 → 305 V ac | |
| Mount Type | Screw | |
| Sub Type | LED Driver | |
| Terminal Type | Wire | |
| Input Voltage Type | AC/DC | |
| IP Rating | IP67 | |
| Driver Current | 2.1 A | |
| Operating Modes | Constant Voltage | |
| Standards/Approvals | CB, CE, CSA, EAC, ENEC, SELV, UL | |
| Series | LPF-25 | |
| Number of Outputs | 5 | |
| Configuration | Enclosed | |
| Power Dissipation | 25.2W | |
| Primary Type | AC-DC | |
| 選取全部 | ||
|---|---|---|
品牌 MEAN WELL | ||
Output Voltage 6.6/12 V | ||
Product Type LED Driver | ||
Maximum Output Power 25.2W | ||
Input Voltage 127 → 431 V dc, 90 → 305 V ac | ||
Mount Type Screw | ||
Sub Type LED Driver | ||
Terminal Type Wire | ||
Input Voltage Type AC/DC | ||
IP Rating IP67 | ||
Driver Current 2.1 A | ||
Operating Modes Constant Voltage | ||
Standards/Approvals CB, CE, CSA, EAC, ENEC, SELV, UL | ||
Series LPF-25 | ||
Number of Outputs 5 | ||
Configuration Enclosed | ||
Power Dissipation 25.2W | ||
Primary Type AC-DC | ||
RS LPF-25 Series 25W LED Driver Power Supply
LPF-25 series 25W LED driver power supply with a wide range universal AC input range of 90 to 305Vac and a built-in active PFC function. These LPF-25 series 25W LED driver power supplies have a class II AC input design (two wires without FG) and are fully potted by heat-conducted glue which provides an IP67 protection rating and an internal shock absorption to withstand 5G vibration. A high efficiency of up to 87% is also offered by these 25W LED driver power supplies and an ability to operate under a wide temperature range of -40 to +70° using free air convection. Typical applications for these 25W LED driver power supplies include LED lighting and moving sign applications in dry, damp or wet locations.
Universal AC input range of 90 to 305 Vac
94V-0 rated fully isolated plastic case
Built-in active PFC function
Fully encapsulated with glue potting to IP67
High effciency of up to 87%
Class II AC input design (no FG)
Class 2 power unit
Free air convection cooling
Short circuit, over current, over voltage and over temperature protection
EMC compliance to EN55015
Harmonic current compliance to EN61000-3-2 Class C (≥50% load)
Note
MTBF to MIL-HDBK-217F (25°C)
Derate power above 50°C
Derate power above 50°C
Approvals
cULus, UL, CB
Standards
UL8750, CSA C22.2 No. 250.0-08 (except for 48V, 54V),EN61347-1, EN61347-2-13 independent, IP67 approved ; Design refer to UL60950-1, TUV EN60950-1
相關連結
- MEAN WELL LED Driver 25.2 W Output, 2.1 A
- MEAN WELL LED Driver 16.08 W Output, 1.34 A
- MEAN WELL Multiple-Stage Constant Power/Constant Voltage LED Driver 25.2 W Output, 2.1 A
- MEAN WELL LED Driver 25.2 W Output, 700 mA
- MEAN WELL LED Driver 25.2 W Output, 600 mA
- MEAN WELL LED Driver 25.2 W Output Resistance, 3 in 1
- MEAN WELL LED Driver 79.2 W Output, 6.6 A
- MEAN WELL LED Driver 25.2 W Output, 1.05 mA 1 to 10 V PWM Resistance
