Recom LED Driver, 8/40 V dc Output, 28 W Output, 500 mA PWM
- RS庫存編號:
- 757-7276
- 製造零件編號:
- RBD-12-0.50/W
- 製造商:
- Recom
可享批量折扣
小計（1 件）*
TWD1,459.00
(不含稅)
TWD1,531.95
(含稅)
訂單超過 $1,300.00 免費送貨
最後的 RS 庫存
- 最終 3 個，準備發貨
單位 | 每單位 |
|---|---|
| 1 - 4 | TWD1,459.00 |
| 5 - 9 | TWD1,417.00 |
| 10 - 24 | TWD1,374.00 |
| 25 - 49 | TWD1,344.00 |
| 50 + | TWD1,316.00 |
* 參考價格
- RS庫存編號:
- 757-7276
- 製造零件編號:
- RBD-12-0.50/W
- 製造商:
- Recom
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Recom | |
| Product Type | LED Driver | |
| Output Voltage | 8/40 V dc | |
| Maximum Output Power | 28W | |
| Input Voltage | 36 V dc | |
| Mount Type | Through Hole | |
| Sub Type | LED Driver | |
| Dimming Operation | PWM | |
| Input Voltage Type | DC | |
| Terminal Type | Pin | |
| IP Rating | IP67 | |
| LED Voltage | 8/36 V | |
| Driver Current | 500 mA | |
| Operating Modes | Constant Current | |
| Number of Outputs | 1 | |
| Series | RBD-12 | |
| Standards/Approvals | RoHS Compliant | |
| Configuration | Enclosed | |
| Power Dissipation | 2.33W | |
| Primary Type | DC-DC | |
| 選取全部 | ||
|---|---|---|
品牌 Recom | ||
Product Type LED Driver | ||
Output Voltage 8/40 V dc | ||
Maximum Output Power 28W | ||
Input Voltage 36 V dc | ||
Mount Type Through Hole | ||
Sub Type LED Driver | ||
Dimming Operation PWM | ||
Input Voltage Type DC | ||
Terminal Type Pin | ||
IP Rating IP67 | ||
LED Voltage 8/36 V | ||
Driver Current 500 mA | ||
Operating Modes Constant Current | ||
Number of Outputs 1 | ||
Series RBD-12 | ||
Standards/Approvals RoHS Compliant | ||
Configuration Enclosed | ||
Power Dissipation 2.33W | ||
Primary Type DC-DC | ||
- COO (Country of Origin):
- TW
RECOM LED Driver, DC Input Type, 0 to 500mA Output current - RBD-12 Series - RBD-12-0.50/W
Take charge of your lighting with this LED driver from RECOM. By converting inputs between 8 and 36V DC into an 8 to 40V DC supply voltage, it's on hand to reliably power LEDs without overheating or the irritation of flickering. This keeps your bulbs performing at a high level, allowing them to shine on through. A mean time between failures of 1.7 million hours means this component can stay the distance.
• High efficiency of 90%, so it's an energy-saving device
• Digital and analogue dimming control options give you greater functionality
• Maximum operating humidity level of 95% RH for use in areas with high levels of water vapour
• Low weight of 17g to avoid putting strain on mounting surfaces
• Compact dimensions of 32.60 (L) x 16.65 (W) x 11.10mm for mounting in small areas
Applications
• Vehicle headlamps and taillights
• Hotels and restaurants
• Retail lighting systems
Can I use this unit in challenging conditions?
Yes, you can. This reliable LED driver is designed to power systems in a temperature range between -40°C and +75°C.
Recom LIGHTLINE 3-20W Constant Current Step Up Step Down LED Driver - RBD-12 Ser
LIGHTLINE RBD-12 series 3-20W constant current step up step down LED drivers. These RBD-12 series PCB mount constant current LED drivers have digital PWM and analogue dimming control and Vref output. Typical applications for these constant current LED drivers include solar powered lighting, traffic signalling and transportation lighting.
PCB through hole mount or wired versions
Digital PMW and analogue dimming
High efficiency of 90%
Short circuit protection and over temperature shutdown
8-40 Vdc output voltage
LED Drivers
Note
MTBF: MIL-HDBK217F at 25°C
Quoted temperature ranges are without derating
Quoted temperature ranges are without derating
Standards
Meets EN-60950-1 and UL-60950-1