STMicroelectronics 1 Output Display Driver, 37V, 20mA PWM Inductor Switch Boost Controller
- RS庫存編號:
- 188-9274P
- 製造零件編號:
- STLD40DPUR
- 製造商:
- STMicroelectronics
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
查看批量定價選項小計 750 件 (以卷裝提供)*
TWD68,250.00
(不含稅)
TWD71,662.50
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 從 2027年3月01日 發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 750 - 1499 | TWD91.00 |
| 1500 + | TWD89.00 |
* 參考價格
- RS庫存編號:
- 188-9274P
- 製造零件編號:
- STLD40DPUR
- 製造商:
- STMicroelectronics
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | STMicroelectronics | |
| Output Voltage | 37V | |
| Product Type | Display Driver | |
| Input Voltage | 3, 5.5V | |
| Mount Type | Surface | |
| Sub Type | Inductor Switch Boost Controller | |
| Dimming Operation | PWM | |
| Terminal Type | QFN8 | |
| Input Voltage Type | DC | |
| Driver Current | 20mA | |
| LED Voltage | 37V | |
| Standards/Approvals | RoHS | |
| Series | STLD40D | |
| Number of Outputs | 1 | |
| Primary Type | Boost Converter | |
| 選取全部 | ||
|---|---|---|
品牌 STMicroelectronics | ||
Output Voltage 37V | ||
Product Type Display Driver | ||
Input Voltage 3, 5.5V | ||
Mount Type Surface | ||
Sub Type Inductor Switch Boost Controller | ||
Dimming Operation PWM | ||
Terminal Type QFN8 | ||
Input Voltage Type DC | ||
Driver Current 20mA | ||
LED Voltage 37V | ||
Standards/Approvals RoHS | ||
Series STLD40D | ||
Number of Outputs 1 | ||
Primary Type Boost Converter | ||
STLD40D is a boost converter that operates from 3.0 V to 5.5 V. It can provide an output voltage as high as 37 V and can drive up to 10 white LEDs in series. The converter is a PFM (pulse frequency modulation) inductor switch that can work in discontinuous (DCM) mode operation. A minimum OFF time of the embedded boost switch TSWis fixed internally and allows limiting the switching frequency. The output current capability is 20 mA with an output voltage of 37 V. The regulation is done by sensing the LED current through the resistor RLED. The device can be turned ON/OFF through the logic enable signal pin EN. By applying a low frequency PWM signal the LEDs can be dimmed. The maximum Peak inductor current can be programmed by connected a resistor RSETto the pin RSET.
Inductor switches boost controller
PFM mode control
High efficiency over wide range of input voltage from 3.0 V to 5.5 V
Over voltage protection with automatic restart
Adjustable Peak current limit
Enable pin with possibility of PWM dimming control
Low shutdown current < 1 μA
Small external component
Good load and line regulation
QFN8 3 x 3 mm
Applications
White LED supply for LCD backlight
Mobile phone
PDA and organizers
Any handsets powered form 3.0 V to 5.5 V
相關連結
- EOZ Push Button Switch Panel Mount SPST 250V ac, IP65
- Festo Compressed Air Pipe Blue Polyurethane 6mm x 50m PUN Series, 159664
- Vishay LH1511BT Series Solid State Relay PCB Mount, 200 V ac/dc Load
- Portescap Brushless DC Motor 15 V dc 9300 rpm, 3mm Shaft Diameter
- Amphenol Industrial Pin Contacts Screw
- Fluke 179 Handheld Digital Multimeter 10A ac Max 1000V ac Max
- Honeywell Amplified Airflow Sensor AWM3000 Series
- Jumo diraTRON Panel Mount PID Temperature Controller 3 Output 2 Relay 110 → 240 V