Recom LED Driver, 2 → 40V dc Output, 20W Output, 500mA Output, Constant Current

RS庫存編號:: 131-4725
製造零件編號:: RACD20-500-LP
製造商:: Recom

Recom LED Driver, 2 → 40V dc Output, 20W Output, 500mA Output, Constant Current

可享批量折扣

小計（1 件）*

TWD486.00

(不含稅)

TWD510.30

訂單超過 $1,300.00 免費送貨

有庫存

32 件準備從其他地點送貨
加上 3 件從 2026年1月29日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 - 1	TWD486.00
2 - 4	TWD477.00
5 - 9	TWD467.00
10 +	TWD453.00

* 參考價格

RS庫存編號:: 131-4725
製造零件編號:: RACD20-500-LP
製造商:: Recom

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Recom
	Output Voltage	2 → 40V dc
	Maximum Output Power	20W
	Output Current	500mA
	Dimmable	No
	Input Voltage	198 → 264 V ac
	Operation	Constant Current
	LED Driver Type	LED Driver
	AC or DC Input Voltage	ac
	IP Rating	IP20
	Current Rating	0 → 500mA
	Series	RACD20-LP
	Voltage Rating	264V ac
	Number of Outputs	1
	Configuration	Enclosed
	Standards Met	CB, CE, EN 55015, EN 61000-3-2 Class C, EN 61000-3-3, EN 61000-4-11 Criteria B, EN 61000-4-11 Criteria C, EN 61000-4-2 Criteria B, EN 61000-4-3 Criteria A, EN 61000-4-4 Criteria B, EN 61000-4-5 Criteria C, EN 61000-4-6 Criteria A, EN 61347-1, EN 61347-2-13, EN 61493, EN 61547, ENEC, ERP Compliant, IEC 61347-1, IEC 61347-2-13, IEC/EN 62384
	Power Dissipation	800mW
	Primary Type	AC-DC

	選取全部
	品牌 Recom
	Output Voltage 2 → 40V dc
	Maximum Output Power 20W
	Output Current 500mA
	Dimmable No
	Input Voltage 198 → 264 V ac
	Operation Constant Current
	LED Driver Type LED Driver
	AC or DC Input Voltage ac
	IP Rating IP20
	Current Rating 0 → 500mA
	Series RACD20-LP
	Voltage Rating 264V ac
	Number of Outputs 1
	Configuration Enclosed
	Standards Met CB, CE, EN 55015, EN 61000-3-2 Class C, EN 61000-3-3, EN 61000-4-11 Criteria B, EN 61000-4-11 Criteria C, EN 61000-4-2 Criteria B, EN 61000-4-3 Criteria A, EN 61000-4-4 Criteria B, EN 61000-4-5 Criteria C, EN 61000-4-6 Criteria A, EN 61347-1, EN 61347-2-13, EN 61493, EN 61547, ENEC, ERP Compliant, IEC 61347-1, IEC 61347-2-13, IEC/EN 62384
	Power Dissipation 800mW
	Primary Type AC-DC

20W Constant Current LED Driver, RACD20-LP Series

Low Profile case (13 mm height max.)
230 V ac input voltage LED Power Supply
Fully Protected for Short Circuit, Open Circuit, Over Load, Over Voltage and Over Temperature
Low Standby Power, ErP conform
Screw Terminal Block Input/Output with Cable Clamps

RECOM LED Driver, Enclosed Configuration, AC/DC Input Voltage - RACD20-LP Series - RACD20-500-LP

Need a way to provide power to your lighting array? With this LED driver from RECOM, you can make light work of it. The device takes input signals of 230V AC and converts them to outputs between 2 and 40V DC with a constant current of 500mA. This smooth and steady supply helps to extend the life of your LEDs. Thanks to a mean time between failures of 30,000 hours, you can be sure this bright spark is a long-lasting solution.

• -20°C to +45°C operating temperature range indicates you can use it in challenging conditions
• High efficiency of 85%, so it's an energy-saving component
• IP20 rating for protection from objects larger than 12mm
• Operating humidity range between 5 and 85% RH for use in areas with high levels of non-condensing water vapour

Applications

• Coving lighting
• Shelving and furniture design
• Troffer lighting systems

What's the power rating of this unit?

This LED driver supplies up to 20W of power from a 75g package, so it's small but mighty.

How much input current does this unit take?

This LED driver has an input current rating of 210mA, for wide compatibility.

Recom LED Drivers