Infineon CDM10VD3XTSA1 LED Driver IC, 25 V 1 mA 6-Pin SOT-23-6
- RS庫存編號:
- 219-5967
- 製造零件編號:
- CDM10VD3XTSA1
- 製造商:
- Infineon
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
查看批量定價選項小計（1 包，共 15 件）*
TWD205.50
(不含稅)
TWD215.70
(含稅)
庫存資訊目前無法存取 - 請稍後再回來查看
單位 | 每單位 | 每包* |
|---|---|---|
| 15 - 15 | TWD13.70 | TWD205.50 |
| 30 - 75 | TWD13.50 | TWD202.50 |
| 90 - 225 | TWD13.10 | TWD196.50 |
| 240 - 465 | TWD12.90 | TWD193.50 |
| 480 + | TWD12.60 | TWD189.00 |
* 參考價格
- RS庫存編號:
- 219-5967
- 製造零件編號:
- CDM10VD3XTSA1
- 製造商:
- Infineon
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Infineon | |
| Product Type | LED Driver IC | |
| Output Current | 1mA | |
| Input Voltage Type | DC | |
| Dimming Operation | PWM | |
| Mount Type | Through Hole | |
| Package Type | SOT-23-6 | |
| Number of Pins | 6 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 105°C | |
| Standards/Approvals | No | |
| Series | CDM10VD | |
| Height | 1.45mm | |
| Length | 2.9mm | |
| Automotive Standard | No | |
| 選取全部 | ||
|---|---|---|
品牌 Infineon | ||
Product Type LED Driver IC | ||
Output Current 1mA | ||
Input Voltage Type DC | ||
Dimming Operation PWM | ||
Mount Type Through Hole | ||
Package Type SOT-23-6 | ||
Number of Pins 6 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 105°C | ||
Standards/Approvals No | ||
Series CDM10VD | ||
Height 1.45mm | ||
Length 2.9mm | ||
Automotive Standard No | ||
0-10 V dimming interface IC with dim-to-off
The Infineon CDM10VD is a fully integrated 0-10V dimming interface IC and comes in a 6pin SOT package to cover space requirements on small PCBs. The device is coming in 4 different variants with different feature sets. The CDM10VD family is targeted for various dimming applications in lighting which requires dim-to-off. The IC can be used to transmit analog voltage-based signals from a 0-10V dimmer or potentiometer to the dimming or PWM input of a lighting controller IC in the form of a current based PWM signal to drive an external opto-coupler.
CDM10VD replaces many components in a traditional solution and reduces BOM and PCB space significantly. It supports active, passive and PWM dimming in applications with DIM-to-Off requirements.
Summary of Features
•Minimum duty cycle: 5% or 10%
•Iout current to drive e.g. optocoplers: 1mA or 5mA
•PWM output frequency: 1kHz
•Dimmer/resistor bias current: 120μA
•Dim-to-off: disabled/enabled
Benefits
•Wide input Vcc range: 11-25V, extended range down to 6V
•Variable input frequency PWM mode with fixed 1kHz output frequency
•Replaces many external components with single chip reducing BOM and PCB space
•Minimum variation from device to device
Potential Applications
•LED drivers needing 0-10V dimming circuits
•Luminaires
•Troffers
•Downlights
•Sconces
•Undercabinet
•Office lighting
•Signage applications
相關連結
- Infineon LED Driver IC, 25 V 1 mA 6-Pin SOT-23-6
- Infineon LED Driver IC, 25 V 5 mA 6-Pin SOT-23-6
- Infineon CDM10VD2XTSA1 LED Driver IC, 25 V 5 mA 6-Pin SOT-23-6
- Infineon CDM10VXTSA1 LED Driver IC, 25 V 1 mA 6-Pin SOT-23-6
- Infineon CDM10VDXTSA1 LED Driver IC, 25 V 1 mA 6-Pin SOT-23-6
- Infineon LED Driver IC, 3/5.5 V 5-Pin SOT-23
- Infineon NLM0011XTSA1 LED Driver IC, 3/5.5 V 5-Pin SOT-23
- Infineon NLM0010XTSA1 LED Driver IC, 3/5.5 V 5-Pin SOT-23