Infineon LED Driver IC, 25 V 1 mA 6-Pin SOT-23-6

RS庫存編號:: 219-5966
製造零件編號:: CDM10VD3XTSA1
製造商:: Infineon

Infineon LED Driver IC, 25 V 1 mA 6-Pin SOT-23-6

此圖片僅供參考，請參閲產品詳細資訊及規格

可享批量折扣

小計（1 卷，共 3000 件）*

TWD27,600.00

(不含稅)

TWD28,980.00

訂單超過 $1,300.00 免費送貨

暫時缺貨

從 2026年10月19日發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位	每卷*
3000 - 3000	TWD9.20	TWD27,600.00
6000 +	TWD9.00	TWD27,000.00

* 參考價格

RS庫存編號:: 219-5966
製造零件編號:: CDM10VD3XTSA1
製造商:: Infineon

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Infineon
	Product Type	LED Driver IC
	Output Current	1mA
	Input Voltage Type	DC
	Dimming Operation	PWM
	Mount Type	Through Hole
	Package Type	SOT-23-6
	Number of Pins	6
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	105°C
	Standards/Approvals	No
	Series	CDM10VD
	Height	1.45mm
	Length	2.9mm
	Automotive Standard	No

	選取全部
	品牌 Infineon
	Product Type LED Driver IC
	Output Current 1mA
	Input Voltage Type DC
	Dimming Operation PWM
	Mount Type Through Hole
	Package Type SOT-23-6
	Number of Pins 6
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 105°C
	Standards/Approvals No
	Series CDM10VD
	Height 1.45mm
	Length 2.9mm
	Automotive Standard No

Datasheet - CDM10VD3XTSA1

0-10 V dimming interface IC with dim-to-off

The Infineon CDM10VD is a fully integrated 0-10V dimming interface IC and comes in a 6pin SOT package to cover space requirements on small PCBs. The device is coming in 4 different variants with different feature sets. The CDM10VD family is targeted for various dimming applications in lighting which requires dim-to-off. The IC can be used to transmit analog voltage-based signals from a 0-10V dimmer or potentiometer to the dimming or PWM input of a lighting controller IC in the form of a current based PWM signal to drive an external opto-coupler.

CDM10VD replaces many components in a traditional solution and reduces BOM and PCB space significantly. It supports active, passive and PWM dimming in applications with DIM-to-Off requirements.

Summary of Features

•Minimum duty cycle: 5% or 10%

•Iout current to drive e.g. optocoplers: 1mA or 5mA

•PWM output frequency: 1kHz

•Dimmer/resistor bias current: 120μA

•Dim-to-off: disabled/enabled

Benefits

•Wide input Vcc range: 11-25V, extended range down to 6V

•Variable input frequency PWM mode with fixed 1kHz output frequency

•Replaces many external components with single chip reducing BOM and PCB space

•Minimum variation from device to device

Potential Applications

•LED drivers needing 0-10V dimming circuits

•Luminaires

•Troffers

•Downlights

•Sconces

•Undercabinet

•Office lighting

•Signage applications