Honeywell Technologies AWM3000 Series Amplified Airflow Sensor for Dry Gas, 200cm³/min Min, 200cm³/min Max

This Airflow sensor from Honeywell is used for accurate Air transmission measurements and control. The sensitive component has a wide measurement range between -200cm³/min (standard Cubic centimetres per minute) and 200cm³/min, meaning it can detect significant changes in Airflow. It's also amplified so it can increase the magnitude of the input signal for a clearer output. Thanks to its robust plastic housing material, this component is built to withstand impact and wear for use in harsh conditions.

• Maximum supply voltage of 15V DC for optimal energy efficiency

• Medical respirators and ventilators

This airflow sensor is specifically designed for use with dry gases and should not be used to monitor liquids.

The sensor can withstand a maximum pressure of 25psi (pounds per square inch), making it a good choice for use in high-pressure applications.

Like the AWM2000 Series, the dual Wheatstone bridges in the AWM3000 series control airflow measurement. The AWM3000 Series is amplified; therefore, it can be used to increase the gain and to introduce voltage offsets to the sensor output. The heater control circuit and the sensing bridge supply circuit are on board the package.

• Laser Trimmed for improved sensor interchangeability;• Flow sensing up to 1.0 SLPM;• Low differential pressure sensing

• Damper control for heating, ventilation, and Air conditioning systems;• Gas analysers;• Low vacuum control;• Process control;• Medical respirators and ventilators;• Oxygen concentrators;• Leak detection equipment;• Vent hoods;• Anaesthesia control;• Gas metering;• Gas chromatography