Nexperia 74HC574D,652 8 Octal D Type Flip Flop HC, 3 State, 20-Pin SOIC
- RS庫存編號:
- 124-2263
- 製造零件編號:
- 74HC574D,652
- 製造商:
- Nexperia
此圖片僅供參考，請參閲產品詳細資訊及規格
暫時無法供應
我們無法確定此產品何時有貨，RS 預計將其從我們的產品目錄中移除。
- RS庫存編號:
- 124-2263
- 製造零件編號:
- 74HC574D,652
- 製造商:
- Nexperia
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Nexperia | |
| Logic Family | HC | |
| Product Type | Octal D Type Flip Flop | |
| Input Type | Single Ended | |
| Output Type | 3 State | |
| Clock Frequency | 24MHz | |
| Polarity | Non-Inverting | |
| Mount Type | Surface | |
| Minimum Supply Voltage | 2V | |
| Package Type | SOIC | |
| Maximum Supply Voltage | 6V | |
| Pin Count | 20 | |
| Maximum Propagation Delay Time @ CL | 45ns | |
| Minimum Operating Temperature | -40°C | |
| Trigger Type | Positive Edge | |
| Flip-Flop Type | Type D | |
| Number of Elements per Chip | 8 | |
| Maximum Operating Temperature | 125°C | |
| Series | 74HC | |
| Height | 2.45mm | |
| Standards/Approvals | JEDEC No. 7A | |
| Length | 13mm | |
| Automotive Standard | No | |
| 選取全部 | ||
|---|---|---|
品牌 Nexperia | ||
Logic Family HC | ||
Product Type Octal D Type Flip Flop | ||
Input Type Single Ended | ||
Output Type 3 State | ||
Clock Frequency 24MHz | ||
Polarity Non-Inverting | ||
Mount Type Surface | ||
Minimum Supply Voltage 2V | ||
Package Type SOIC | ||
Maximum Supply Voltage 6V | ||
Pin Count 20 | ||
Maximum Propagation Delay Time @ CL 45ns | ||
Minimum Operating Temperature -40°C | ||
Trigger Type Positive Edge | ||
Flip-Flop Type Type D | ||
Number of Elements per Chip 8 | ||
Maximum Operating Temperature 125°C | ||
Series 74HC | ||
Height 2.45mm | ||
Standards/Approvals JEDEC No. 7A | ||
Length 13mm | ||
Automotive Standard No | ||
- COO (Country of Origin):
- TH
The 74HC574, 74HCT574 is an 8-bit positive-edge triggered D-type flip-flop with 3-state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip-flops will store the state of their individual D-inputs that meet the set-up and hold time requirements on the LOW-to-HIGH clock (CP) transition. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does not affect the state of the flip-flops. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
Mixed 5 V and 3.3 V applications
Improved signal integrity with integrated termination resistors
High noise immunity
Flow through pin out for easy layout
Wide supply voltage range
Low propagation delay
Overvoltage tolerant input options
Integrated source termination resistor options
Bus hold options
Key applications
Frequency division
Controlled delays
Interface between asynchronous and synchronous systems
相關連結
- Nexperia 74HC574D 3-State, 20-Pin SOIC
- Nexperia 74HC173D 3 State, 16-Pin SOIC
- Nexperia 74HC123D 16-Pin SOIC
- Nexperia 74HC574D 3 State, 20-Pin SO
- Nexperia 74HC74D Dual D Type, 14-Pin SOIC
- Nexperia 74HC175D 16-Pin SOIC
- Nexperia 74HCT112D LSTTL, 16-Pin SOIC
- onsemi MM74HC74AM 2 Octal D Type Flip Flop HC 14-Pin SOIC