Norgren B72G Filter Regulator, 40 μm, 3/8 in, Semi Automatic, 17 bar

查看所有Filter Regulators

小計（1 件）*

TWD7,998.00

(不含稅)

TWD8,397.90

(含稅)

Add to Basket
選擇或輸入數量
有庫存
  • 22 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位
每單位
1 +TWD7,998.00

* 參考價格

RS庫存編號:
267-9377
製造零件編號:
B72G-3GK-ST3-RMN
製造商:
Norgren
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

Norgren

Port Size

3/8 in

Product Type

Filter Regulator

Maximum Operating Pressure

17 bar

Connection Thread Standard

G

Series

B72G

Drain Type

Semi Automatic

Filtration Size

40μm

Pressure Gauge Port Size

1/8 in

Overall Length

35mm

Minimum Operating Temperature

-34°C

Maximum Operating Temperature

50°C

Overall Width

50.5mm

Standards/Approvals

RoHS

Overall Height

258mm

Pressure Gauge Port Thread Standard

Rc

Bowl Material

Polycarbonate

Pressure Setting Range

0.3 to 10 bar

豁免

COO (Country of Origin):
DE

IMI Norgren B72G Series General Purpose Filter Regulator, G3/8 - B72G-3GK-ST3-RMN


Ensure reliable control of air flow and separation of clean air with this Norgren B72G general purpose combined filter regulator unit.

The filter removes contaminants such as water and particles from the air flow of the pneumatic system, while the regulator keeps the pressure level constant, ensuring optimal performance of the system. This also helps to maintain the service life of the equipment. It has a 0.3 bar to 10 bar pressure range and 40μm filtration. The B72G features a convenient quick release bayonet bowl which can be easily removed and replaced. It has a broad operating temperature range of -20°C to +50°C.

The design of this filter regulator means that it is also compatible with other Excelon products, for ease-of-installation and customisation.

Features and Benefits:


• Semi-automatic drain

• Relieving diaphragm

• Long-life filter element

• Push-to-lock adjustment knob securely locks in the pressure setting

• Transparent polycarbonate bowl

Note: Typical flow data is accurate with 10 bar inlet pressure, 6.3 bar set pressure and a 1 bar drop. Maximum inlet pressure 10 bar.


How do I clean the filter bowl?


Remove the bowl by pushing it into the body and turning it counter-clockwise. You should then clean the plastic bowl with warm water only, and then rinse and dry. If the bowl shows signs of cracking or cloudiness it must be replaced.

相關連結