SMC 1/2 in FRL Assembly, 5 μm Filtration Size Integrated Pressure Gauge

RS庫存編號:: 255-3218
製造零件編號:: AC40A-F04E-D
製造商:: SMC

SMC 1/2 in FRL Assembly, 5 μm Filtration Size Integrated Pressure Gauge

查看所有Filter Regulator Lubricators

小計（1 件）*

TWD4,856.00

(不含稅)

TWD5,098.80

(含稅)

訂單超過 $1,300.00 免費送貨

有庫存

5 件準備從其他地點送貨
加上 13 件從 2026年10月29日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD4,856.00

* 參考價格

RS庫存編號:: 255-3218
製造零件編號:: AC40A-F04E-D
製造商:: SMC

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	SMC
	Port Size	1/2 in
	Product Type	FRL Assembly
	Maximum Flow Rate	6500L/min
	Integrated Pressure Gauge	Yes
	Connection Thread Standard	G
	Series	AC
	Filtration Size	5μm
	Pressure Gauge Port Size	1/8 in
	Overall Length	280mm
	Minimum Operating Temperature	-5°C
	Maximum Operating Temperature	60°C
	Maximum Operating Pressure	10 bar
	Overall Width	105mm
	Overall Height	270mm
	Standards/Approvals	RoHS
	Pressure Setting Range	0.05 → 0.85 MPa
	Bowl Material	Polycarbonate

	選取全部
	品牌 SMC
	Port Size 1/2 in
	Product Type FRL Assembly
	Maximum Flow Rate 6500L/min
	Integrated Pressure Gauge Yes
	Connection Thread Standard G
	Series AC
	Filtration Size 5μm
	Pressure Gauge Port Size 1/8 in
	Overall Length 280mm
	Minimum Operating Temperature -5°C
	Maximum Operating Temperature 60°C
	Maximum Operating Pressure 10 bar
	Overall Width 105mm
	Overall Height 270mm
	Standards/Approvals RoHS
	Pressure Setting Range 0.05 → 0.85 MPa
	Bowl Material Polycarbonate

Datasheet - AC40A-F04E-D

COO (Country of Origin):: CN

SMC Series AC FRL Assembly, 6500L/min Maximum Flow Rate, 10 Bar Maximum Operating Pressure - AC40A-F04E-D

This frl assembly is a Compact Air-treatment combination designed to prepare compressed Air for industrial control and actuation systems. It integrates filtration, pressure regulation and lubrication in a single unit for installation in pneumatic supply lines, handling typical shop-floor environments where steady pressure control and particulate removal are required.

Features & Benefits

• 5μm filtration protects downstream valves and actuators
• 0.05 to 0.85MPa regulator range enables precise pressure control
• 6500L/min maximum flow supports high-demand pneumatic systems
• Polycarbonate bowl with lubricator facilitates visible oil supply monitoring
• Maximum operating pressure 10 bar provides robust system margin
• Pressure gauge port 1/8in allows convenient pressure feedback fitting

Applications

• Suitable for pneumatic control panels requiring regulated Air supply
• used with cylinder arrays in automated assembly lines
• Ideal for Air-operated tools needing lubrication and filtration
• Can be used for preparatory Air treatment in test rigs
• Suitable for compressed Air distribution headers in workshops

What temperature limits apply to use in warm environments?

The unit is rated for medium temperatures up to 60°C and down to -5°C provided there is no freezing.

How is residual pressure handled during system venting?

The body incorporates a relieving exhaust mechanism to reduce downstream pressure when the set point is lowered.

What materials are used for the sight bowl and lubricant reservoir?

The bowl is MADE from polycarbonate and the lubricator holds 135cm³ of oil capacity.

What thread standard and inlet connection are supplied?

The unit uses a G-thread standard and the main port size is 1/2in.

How large is the drain capacity for filtered condensate?

The drain port capacity is specified at 45cm³ for condensate removal.