SMC 1/2 in FRL Assembly, Automatic Drain, 5 μm Filtration Size Integrated Pressure Gauge

RS庫存編號:: 255-3216
製造零件編號:: AC40A-F04DE-D
製造商:: SMC

SMC 1/2 in FRL Assembly, Automatic Drain, 5 μm Filtration Size Integrated Pressure Gauge

查看所有Filter Regulator Lubricators

小計（1 件）*

TWD5,980.00

(不含稅)

TWD6,279.00

(含稅)

訂單超過 $1,300.00 免費送貨

製造商存貨

準備從 2026年6月08日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD5,980.00

* 參考價格

RS庫存編號:: 255-3216
製造零件編號:: AC40A-F04DE-D
製造商:: SMC

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	SMC
	Port Size	1/2 in
	Product Type	FRL Assembly
	Integrated Pressure Gauge	Yes
	Maximum Flow Rate	6500L/min
	Drain Type	Automatic
	Connection Thread Standard	G
	Series	AC
	Filtration Size	5μm
	Pressure Gauge Port Size	1/8 in
	Overall Length	280mm
	Minimum Operating Temperature	-5°C
	Maximum Operating Temperature	+60°C
	Maximum Operating Pressure	10 bar
	Standards/Approvals	RoHS
	Overall Width	105mm
	Overall Height	270mm
	Pressure Setting Range	0.05 to 0.85 MPa
	Bowl Material	Polycarbonate

	選取全部
	品牌 SMC
	Port Size 1/2 in
	Product Type FRL Assembly
	Integrated Pressure Gauge Yes
	Maximum Flow Rate 6500L/min
	Drain Type Automatic
	Connection Thread Standard G
	Series AC
	Filtration Size 5μm
	Pressure Gauge Port Size 1/8 in
	Overall Length 280mm
	Minimum Operating Temperature -5°C
	Maximum Operating Temperature +60°C
	Maximum Operating Pressure 10 bar
	Standards/Approvals RoHS
	Overall Width 105mm
	Overall Height 270mm
	Pressure Setting Range 0.05 to 0.85 MPa
	Bowl Material Polycarbonate

SMC Series AC FRL Assembly, 6500L/min Maximum Flow Rate, 10 Bar Maximum Operating Pressure - AC40A-F04DE-D

This frl assembly prepares and conditions compressed Air for industrial control and actuation systems by combining filtration, pressure regulation and lubrication in a single unit. It is designed for general pneumatic supply lines, offering relief-type exhaust behaviour and an embedded square pressure gauge with limit indicator to assist system monitoring.

Features & Benefits

• 5 μm filtration for particle removal and extended downstream life
• 0.05 to 0.85 MPa regulator range for precise pressure control
• 6500 L/min maximum flow to support high-demand circuits
• Automatic float drain for unattended condensate removal
• Polycarbonate bowl with lubricator for visible oil reservoir
• G-thread ports including 1/8 in gauge port for standard connections

Applications

• Suitable for pneumatic actuator supply in automation cells
• Ideal for control panels requiring Compact Air preparation
• used with industrial valves needing regulated, lubricated Air
• Can be used for pneumatic test benches with high flow demand

What temperature range can it operate within?

It functions between -5°C and +60°C without freezing, applicable to typical plant environments.

What pressures can the unit withstand during operation?

The maximum working pressure is 10 bar and proof pressure is 1.5 MPa for short-term conditions.

How much lubricant and condensate capacity does it provide?

The lubricator holds 135 cm³ of oil and the drain capacity is 45 cm³ for condensate collection.

What mounting orientation and flow direction should be observed?

Install with flow from left to right as marked to ensure correct internal sequencing and relieving exhaust operation.