Microchip, 28-Pin SSOP, Controller IC, 3.3 V 10 Mbps Serial-SPI 3.6V ENC28J60-I/SS, Full Duplex/Half Duplex
- RS庫存編號:
- 912-2941
- 製造零件編號:
- ENC28J60-I/SS
- 製造商:
- Microchip
此圖片僅供參考，請參閲產品詳細資訊及規格
暫時無法供應
抱歉，我們不知道何時會到貨。
- RS庫存編號:
- 912-2941
- 製造零件編號:
- ENC28J60-I/SS
- 製造商:
- Microchip
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Microchip | |
| Maximum Data Rate | 10Mbps | |
| Product Type | Controller IC | |
| Communication Mode | Full Duplex/Half Duplex | |
| Loopback Mode | Internal | |
| Standard Supported | IEEE 802.3 | |
| Interface Type | Serial-SPI | |
| Mount Type | Surface | |
| Package Type | SSOP | |
| Maximum Supply Voltage | 3.6V | |
| Pin Count | 28 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Length | 10.5mm | |
| Height | 2mm | |
| Width | 5.6mm | |
| Standards/Approvals | No | |
| Minimum Supply Voltage | 3.3V | |
| Automotive Standard | No | |
| 選取全部 | ||
|---|---|---|
品牌 Microchip | ||
Maximum Data Rate 10Mbps | ||
Product Type Controller IC | ||
Communication Mode Full Duplex/Half Duplex | ||
Loopback Mode Internal | ||
Standard Supported IEEE 802.3 | ||
Interface Type Serial-SPI | ||
Mount Type Surface | ||
Package Type SSOP | ||
Maximum Supply Voltage 3.6V | ||
Pin Count 28 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Length 10.5mm | ||
Height 2mm | ||
Width 5.6mm | ||
Standards/Approvals No | ||
Minimum Supply Voltage 3.3V | ||
Automotive Standard No | ||
- COO (Country of Origin):
- US
ECN28J60 10Base-T Ethernet Controllers
The ENC28J60 from Microchip is a great stand-alone ethernet controller. ENC28J60 is a 10BASE-T controller in a small form factor SOIC package with 28 pins. Featuring bandwidth of 10Mbps and onboard MAC & PHY, this controller is great for a range of applications. Microchips ethernet controllers also contain internal DMA for faster memory copying and a max speed of 25Mhz.
Features and Benefits:
Applications:
PHY and MAC?
PHY stand for 'Physical layer'. A physical layer is the first layer in an OSI stack. PHY layer will define physical and electrical characteristics of the network.
MAC is the abbreviation for 'Medium Access Control' and is the second layer in the OSI stack. The MAC is responsible for sending and receiving RF frames.
Daughter boards
Ethernet Communications - Microchip
相關連結
- Microchip Controller IC Full Duplex/Half Duplex
- Microchip Controller IC Full Duplex/Half Duplex
- Microchip Ethernet Controller Full Duplex/Half Duplex
- Microchip Ethernet Controller Full Duplex/Half Duplex
- Microchip Ethernet Controller ENC28J60-I/SP, Full Duplex/Half Duplex
- Microchip Ethernet Controller Full Duplex/Half Duplex
- WIZnet Inc Ethernet Controller Full Duplex/Half Duplex
- WIZnet Inc Ethernet Controller Full Duplex/Half Duplex