Microchip ENC28J60-I/SS, Controller IC, 3.3 V 10 Mbps Serial-SPI, 28-Pin 3.6 V SSOP

RS庫存編號:: 770-7755
Distrelec 貨號:: 304-35-464
製造零件編號:: ENC28J60-I/SS
製造商:: Microchip

Microchip ENC28J60-I/SS, Controller IC, 3.3 V 10 Mbps Serial-SPI, 28-Pin 3.6 V SSOP

此圖片僅供參考，請參閲產品詳細資訊及規格

可享批量折扣

小計（1 包，共 2 件）*

TWD259.00

(不含稅)

TWD271.96

訂單超過 $1,300.00 免費送貨

有庫存

4 件準備從其他地點送貨
加上 34 件從 2026年2月26日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位	每包*
2 - 2	TWD129.50	TWD259.00
4 +	TWD127.00	TWD254.00

* 參考價格

RS庫存編號:: 770-7755
Distrelec 貨號:: 304-35-464
製造零件編號:: ENC28J60-I/SS
製造商:: Microchip

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Microchip
	Product Type	Controller IC
	Maximum Data Rate	10Mbps
	Communication Mode	Full Duplex/Half Duplex
	Loopback Mode	Internal
	Interface Type	Serial-SPI
	Standard Supported	IEEE 802.3
	Mount Type	Surface
	Package Type	SSOP
	Pin Count	28
	Maximum Supply Voltage	3.6V
	Minimum Operating Temperature	85°C
	Maximum Operating Temperature	-40°C
	Standards/Approvals	No
	Minimum Supply Voltage	3.3V
	Width	5.6 mm
	Height	2mm
	Length	10.5mm
	Automotive Standard	No

	選取全部
	品牌 Microchip
	Product Type Controller IC
	Maximum Data Rate 10Mbps
	Communication Mode Full Duplex/Half Duplex
	Loopback Mode Internal
	Interface Type Serial-SPI
	Standard Supported IEEE 802.3
	Mount Type Surface
	Package Type SSOP
	Pin Count 28
	Maximum Supply Voltage 3.6V
	Minimum Operating Temperature 85°C
	Maximum Operating Temperature -40°C
	Standards/Approvals No
	Minimum Supply Voltage 3.3V
	Width 5.6 mm
	Height 2mm
	Length 10.5mm
	Automotive Standard No

Datasheet

ECN28J60 10Base-T Ethernet Controllers

The ENC28J60 from Microchip is a great stand-alone ethernet controller. ENC28J60 is a 10BASE-T controller in a small form factor SOIC package with 28 pins. Featuring bandwidth of 10Mbps and onboard MAC & PHY, this controller is great for a range of applications. Microchips ethernet controllers also contain internal DMA for faster memory copying and a max speed of 25Mhz.

Features and Benefits:

10BASE-T

Integrated MAC and PHY

10Mbps bandwidth

IEEE 802.3 compatible

SPI interface with clock speeds up to 25Mhz

Supports MAC Unicast, Multicast and Broadcast packets

PHY loopback mode and programmable outputs

Applications:

Security

Instrumentation

Home control

Building automation

Industrial automation

VoIP

PHY and MAC?

PHY stand for 'Physical layer'. A physical layer is the first layer in an OSI stack. PHY layer will define physical and electrical characteristics of the network.

MAC is the abbreviation for 'Medium Access Control' and is the second layer in the OSI stack. The MAC is responsible for sending and receiving RF frames.

Daughter boards

AC164121 – 667-7899

AC164123 – 667-7902