Microchip KSZ8794CNXCC, Ethernet Switch IC, 3.3 V 100 Mbps RMII, MDIO, MII, MDC, RGMII, SPI, 64-Pin 3.3 V QFN
- RS庫存編號:
- 177-3946
- 製造零件編號:
- KSZ8794CNXCC
- 製造商:
- Microchip
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計（1 包，共 2 件）*
TWD377.00
(不含稅)
TWD395.84
(含稅)
添加 8 件 件可免費送貨
有庫存
- 1,038 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每包* |
|---|---|---|
| 2 - 64 | TWD188.50 | TWD377.00 |
| 66 + | TWD184.00 | TWD368.00 |
* 參考價格
- RS庫存編號:
- 177-3946
- 製造零件編號:
- KSZ8794CNXCC
- 製造商:
- Microchip
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Microchip | |
| Product Type | Ethernet Switch IC | |
| Maximum Data Rate | 100Mbps | |
| Sub Type | Layer 2 Managed Ethernet Switch | |
| Communication Mode | MDIO, SPI, MDC | |
| Number of Transceivers | 4 | |
| Loopback Mode | Multiple Loopback of Remote Phy and Mac Modes | |
| Interface Type | RMII, MDIO, MII, MDC, RGMII, SPI | |
| Standard Supported | IEEE 802.3az, IEEE 802.3, IEEE 802.1az, IEEE, IEEE 802.3u, IEEE 802.1Q | |
| Number of Ports | 4 | |
| Mount Type | Surface | |
| Package Type | QFN | |
| Pin Count | 64 | |
| Maximum Supply Voltage | 3.3V | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | 70°C | |
| Width | 8 mm | |
| Minimum Supply Voltage | 3.3V | |
| Length | 8mm | |
| Standards/Approvals | RoHS, Lead-Free | |
| Height | 0.8mm | |
| Automotive Standard | No | |
| 選取全部 | ||
|---|---|---|
品牌 Microchip | ||
Product Type Ethernet Switch IC | ||
Maximum Data Rate 100Mbps | ||
Sub Type Layer 2 Managed Ethernet Switch | ||
Communication Mode MDIO, SPI, MDC | ||
Number of Transceivers 4 | ||
Loopback Mode Multiple Loopback of Remote Phy and Mac Modes | ||
Interface Type RMII, MDIO, MII, MDC, RGMII, SPI | ||
Standard Supported IEEE 802.3az, IEEE 802.3, IEEE 802.1az, IEEE, IEEE 802.3u, IEEE 802.1Q | ||
Number of Ports 4 | ||
Mount Type Surface | ||
Package Type QFN | ||
Pin Count 64 | ||
Maximum Supply Voltage 3.3V | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature 70°C | ||
Width 8 mm | ||
Minimum Supply Voltage 3.3V | ||
Length 8mm | ||
Standards/Approvals RoHS, Lead-Free | ||
Height 0.8mm | ||
Automotive Standard No | ||
- COO (Country of Origin):
- TW
The KSZ8794CNX is a highly integrated, Layer 2 managed, four-port switch with numerous features designed to reduce system cost. It is intended for cost-sensitive applications requiring three 10/100Mbps copper ports and one 10/100/1000Mbps Gigabit uplink port. The KSZ8794CNX incorporates a small package outline, low power consumption with internal biasing, and on-chip termination
Integrated 4-port 10/100 Layer-2 switch with Gigabit uplink
New generation switch with three MACs, one GMAC (for uplink) and three PHYs
10/100Base-T/TX switch system which combines a switch engine, frame buffer management, address lookup table, queue management, MIB counters, MAC, and PHY transceivers
Rapid spanning tree support (RSTP) for topology management
Microchip's LinkMD® cable diagnostic capabilities for determining cable opens, shorts, and length
Advanced Switch Capabilities
VLAN support for up to 128 active VLAN groups (full range 4096 of VLAN IDs)
相關連結
- Microchip 3.3 V 100 Mbps RMII MII RGMII 64-Pin 3.3 V QFN
- Microchip 3.3 V 100 Mbps RGMII MDIO SPI 64-Pin 3.3 V QFN
- Microchip KSZ8794CNXIC 3.3 V 100 Mbps RGMII MDIO SPI 64-Pin 3.3 V QFN
- Microchip 3.3 V 100 Mbps SPI I2C SNI RMII 128-Pin 3.3 V PQFP
- Microchip KSZ8895FQXIA 3.3 V 100 Mbps SPI I2C SNI RMII 128-Pin 3.3 V PQFP
- Microchip 1.8 V 100 Mbps MDC MDIO 128-Pin 3.3 V PQFP
- Microchip KSZ8995XA 1.8 V 100 Mbps MDC MDIO 128-Pin 3.3 V PQFP
- Microchip 3.3 V 100 Mbps RMII MII, 80-Pin 3.46 V LQFP