Belden 1633PE, 500 m Cat5E Cable, Black Polyethylene Sheath

RS庫存編號:: 631-661
製造零件編號:: 1633PE.00500
製造商:: Belden

Belden 1633PE, 500 m Cat5E Cable, Black Polyethylene Sheath

小計（1 卷，共 500 米）*

TWD19,499.00

(不含稅)

TWD20,473.95

訂單超過 $1,300.00 免費送貨

暫時缺貨

1 件從 2026年7月02日起裝運發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

卷	每卷	每米*
1 +	TWD19,499.00	TWD38.998

* 參考價格

RS庫存編號:: 631-661
製造零件編號:: 1633PE.00500
製造商:: Belden

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Belden
	Product Type	Cat5E Cable
	Series	1633PE
	Cable Length	500m
	Sub Type	Cat5e Cable
	Jacket Material	Polyethylene
	Jacket Colour	Black
	Minimum Operating Temperature	30°C
	Conductor Type	Solid
	Maximum Operating Temperature	60°C
	Standards/Approvals	REACH, EU CE, IEC 60332-1-2, RoHS
	Outside Diameter	6.3mm
	Voltage	72V
	Number of Cores	4
	Conductor Material	Bare Copper

	選取全部
	品牌 Belden
	Product Type Cat5E Cable
	Series 1633PE
	Cable Length 500m
	Sub Type Cat5e Cable
	Jacket Material Polyethylene
	Jacket Colour Black
	Minimum Operating Temperature 30°C
	Conductor Type Solid
	Maximum Operating Temperature 60°C
	Standards/Approvals REACH, EU CE, IEC 60332-1-2, RoHS
	Outside Diameter 6.3mm
	Voltage 72V
	Number of Cores 4
	Conductor Material Bare Copper

COO (Country of Origin):: HU

Belden 1633PE Series Thin Ethernet Cable, 500m Cable Length, Black Jacket - 1633PE.00500

This thin Ethernet cable serves wired data transmission in industrial and commercial installations where a slim profile and permanent routing are needed. It is a four-core Cat5e assembly with solid conductors and a protective polyethylene outer covering, intended for continuous runs in control panels, machine rooms and structured cabling racks.

Features and Benefits:

• Solid bare copper conductors deliver stable signal integrity under load
• Polyethylene jacket offers chemical resistance for industrial environments
• Black outer sheath aids discrete installation and cable identification
• Rated for operation between -30°C and 60°C for low-temperature environments
• 72V voltage rating suitable for many automation and control circuits

Applications

• Suitable for Ethernet links in factory automation networks
• Ideal for fixed data wiring inside control cabinets
• Used for structured cabling in electronics testing labs
• Can be used for permanent runs in machine-to-machine communications

What conductor construction is used and why does it matter?

The cable uses single solid bare copper conductors which reduce insertion loss and provide consistent impedance for permanently installed links.

How does the sheath material affect installation choices?

The polyethylene jacket gives abrasion and moisture resistance, making it appropriate where cables run through conduit or alongside machinery.

Is the cable suited to confined routing spaces?

Its thin-profile 6.3mm outside diameter eases routing through cable trays and tight conduits while maintaining four-core connectivity.

Which approvals does it hold that relate to safety testing?

It meets IEC 60332-1-2 fire performance and carries CE, RoHS and REACH recognitions relevant to material and emissions compliance.