Electrotherm Wired DTM 4000 Digital Thermometer, 1 Input(s), 60 °C Max

小計(1 件)*

TWD29,072.00

(不含稅)

TWD30,525.60

(含稅)

Add to Basket
選擇或輸入數量
製造商存貨
  • 準備從 2027年1月12日 起發貨
**需要更多嗎?**輸入您需要的數量,然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位
每單位
1 +TWD29,072.00

* 參考價格

RS庫存編號:
187-5662
製造零件編號:
DTM 4000
製造商:
Electrotherm
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

Electrotherm

Product Type

Digital Thermometer

Maximum Temperature Measurement

60°C

Model Number

DTM 4000

Thermometer Type

Wired

Number of Temperature Inputs

1

Power Source

Battery

Battery Life

30h

Height

25mm

Hazardous Area Certification

No

Weight

170g

Standards/Approvals

No

Width

80mm

Length

120mm

Battery Type

AA

Plug Type

4-Pin, M8

COO (Country of Origin):
DE
The DTM4000 is an inexpensive digital handheld multifunctional device for various sensors. The sensors are queried via a standard bus (I2C). A wide range of sensors is available for this purpose. Temperature, humidity (various inaccuracies) and brightness are currently realized. The sensors are pre-calibrated with a certain Basic accuracy. New sensors are constantly being integrated. The device is powered by two AA cells. The display is shown on a two-line backlighted display. A USB Interface is used for data acquisition and for setting parameters and calibration data of the sensors. For this purpose, they are equipped with an additional memory. Additional information can also be stored in a designated memory area. A corresponding PC program is available on the Internet. Current firmware versions can also be loaded via this Interface if new sensors make this necessary. The sensors are detected automatically after switching on. The DTM4000 switches off after 3 minutes. This can be prevented by the software. If a USB cable is connected, the DTM4000 will not switch off, as the device is then supplied with power. The scope of delivery includes a standard temperature sensor and a transit case.

相關連結

第一時間了解我們的最新產品和優惠

電郵

您在訂閱此郵件時提供的個人信息將根據《隱私政策》進行處理。