Jumo Data Acquisition Receiver for Use with Data Acquisition Receiver
- RS庫存編號:
- 279-842
- 製造零件編號:
- 902931/30-8-10-25/000
- 製造商:
- Jumo
小計（1 件）*
TWD27,014.00
(不含稅)
TWD28,364.70
(含稅)
訂單超過 $1,300.00 免費送貨
製造商存貨
- 準備從 2026年9月04日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD27,014.00 |
* 參考價格
- RS庫存編號:
- 279-842
- 製造零件編號:
- 902931/30-8-10-25/000
- 製造商:
- Jumo
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Jumo | |
| Product Type | Data Acquisition Receiver | |
| Accessory Type | Receiver | |
| For Use With | Data Acquisition | |
| Standards/Approvals | IC, FCC, cULus, DIN EN 60715 | |
| 選取全部 | ||
|---|---|---|
品牌 Jumo | ||
Product Type Data Acquisition Receiver | ||
Accessory Type Receiver | ||
For Use With Data Acquisition | ||
Standards/Approvals IC, FCC, cULus, DIN EN 60715 | ||
- COO (Country of Origin):
- DE
The Jumo The Jumo Radio receiver is used in conjunction with compatible transmitters for mobile or stationary measurement of physical quantities. By utilizing advanced wireless technology operating at the industrial radio frequency of 868.4 MHz, installation effort is significantly reduced. Cable connections are unnecessary, as the radio-based sensor technology also functions reliably in harsh industrial environments. The included Lambda/4 antenna with a 50-ohm impedance can be directly screwed on or mounted externally. When using the optional antenna wall bracket with a 3-meter antenna cable, the free-field range is 300 meters. The measured values received from the transmitter are processed, displayed, and made available as linear current or voltage signals (0(4) to 20 mA, 0 to 10 V) and via the digital RS485 interface.
A front-facing connector for a PC interface with TTL/RS232 or USB/TTL converter is provided for connecting the receiver to a PC
The receiver, housed in a DIN rail enclosure, is designed for mounting on a 35 x 7.5 mm DIN rail according to DIN EN 60715
The screw terminals for electrical connections are arranged on different levels, with a maximum wire cross-section of 2.5 mm²
The device is powered by an AC/DC 20 to 30 V, 48 to 63 Hz supply
Operation and configuration can be performed via the keyboard in conjunction with a two-line LCD display or more conveniently through a setup program Parameters such as filter constants, offset, alarms, and min/max value tracking can be set separately for each channel
相關連結
- Jumo Data Acquisition Receiver for Use with Data Acquisition Receiver
- Jumo Data Acquisition Module for Use with Data Acquisition Connector
- Keysight Technologies Data Acquisition Software for Use with Data Acquisition Application Data Acquisition System
- Keysight Technologies Data Acquisition Multiplexer for Use with Data Acquisition System Data Acquisition Multiplexer
- Keysight Technologies Data Acquisition Terminal Block for Use with 34980A Data Acquisition System Dual 4 x 8 Armature
- Keysight Technologies Data Acquisition Terminal Block for Use with 34980A Data Acquisition System Dual/Quad 4 x 8 Reed
- Keysight Technologies Data Acquisition Module for Use with DAQ970 Data Acquisition System Multiplexer Module
- Keysight Technologies Data Acquisition Connector for Use with 34980A Data Acquisition System Breadboard Module