Infineon, Magnetic Speed Sensors IC 4-Pin, PG-SSO-4-1
- RS庫存編號:
- 258-4091
- 製造零件編號:
- TLE4922XANFHALA1
- 製造商:
- Infineon
此圖片僅供參考,請參閲產品詳細資訊及規格
可享批量折扣
小計(1 組,共 2000 件)*
TWD57,600.00
(不含稅)
TWD60,480.00
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 從 2026年5月18日 發貨
**需要更多嗎?**輸入您需要的數量,然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每膠帶* |
|---|---|---|
| 2000 - 2000 | TWD28.80 | TWD57,600.00 |
| 4000 + | TWD27.90 | TWD55,800.00 |
* 參考價格
- RS庫存編號:
- 258-4091
- 製造零件編號:
- TLE4922XANFHALA1
- 製造商:
- Infineon
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Infineon | |
| Product Type | Magnetic Speed Sensors IC | |
| Quiescent Current | 5mA | |
| Current Rating | 5.3 mA | |
| Package Type | PG-SSO-4-1 | |
| Pin Count | 4 | |
| Mount Type | Through Hole | |
| Minimum Supply Voltage | 4.5V | |
| Maximum Supply Voltage | 18V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 195°C | |
| Series | TLE4922-XAN-F | |
| Width | 3.71 mm | |
| Standards/Approvals | RoHS Compliant | |
| Length | 5.34mm | |
| Height | 1mm | |
| Automotive Standard | AEC | |
| 選取全部 | ||
|---|---|---|
品牌 Infineon | ||
Product Type Magnetic Speed Sensors IC | ||
Quiescent Current 5mA | ||
Current Rating 5.3 mA | ||
Package Type PG-SSO-4-1 | ||
Pin Count 4 | ||
Mount Type Through Hole | ||
Minimum Supply Voltage 4.5V | ||
Maximum Supply Voltage 18V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 195°C | ||
Series TLE4922-XAN-F | ||
Width 3.71 mm | ||
Standards/Approvals RoHS Compliant | ||
Length 5.34mm | ||
Height 1mm | ||
Automotive Standard AEC | ||
XENSIV™ - TLE4922 magnetic Hall speed sensor for 2-wheeler and automotive applications
The Infineon XENSIVTM TLE4922 is an active mono cell Hall sensor ideally suited for detecting the motion and position of ferromagnetic and permanent magnet structures. An additional self-calibration module has been implemented to achieve optimum accuracy during normal running operation. There are two different types of our TLE4922 available, the TLE4922-XAN and the TLE4922-XIN version. Both types have passed qualification at Tj=155°C. The difference of both devices consists in their field of usage and the duration of the qualification run.
•TLE4922-XAN type has passed 2000 hour qualification run and is suited for speed measurements in 2-wheeler application with a supply voltage of 9V;•TLE4922-XIN has passed 5000 hour qualification run being suitable for 12V automotive applications
Summary of Features
•Twist independent mounting (TIM) enables one sensor fits all;•Protected against harsh environment due to;•Short-circuit at the output
Over temperature shutdown at the output and
Reverse voltage protection;•Supreme performance due to adaptive symmetrical hysteresis / threshold;•Independent of back bias magnet polarity due to ±440mT full scale range;•Enhanced EMC & ESD robustness - ESD : ±4kV HBM;•Wide operating temperature range - Tjunction: -40 °C - 155 °C;•True zero speed up to 8kHz signal frequency;•Enabling Low Power Application: Idd = 5mA at Vdd = 9V;•Large operating voltage range of 4.5V up to 16V;•Small thin package (PG-SSO-4-1);•Robustness against wheel run outs enables to sense broad range of wheels
Potential Applications
•Small engines (2- and 3 wheeler) applications;•Crankshaft speed and position sensing;•Transmission speed on output shaft;•Speedometer application
相關連結
- Infineon TLE4922XANFHALA1 PG-SSO-4-1
- Infineon TLE4941CHAMA2 PG-SSO-2-4
- Infineon PG-SSO-2-4
- Infineon TLE49421CHAMA2 PG-SSO-2-4
- Infineon PG-SSO-2-53
- Infineon TLE4941PLUSCXAMA1 PG-SSO-2-53
- Infineon Surface Hall Effect Sensor Latch 3 V 32 V 3-Pin
- Infineon ITS4142NHUMA1 High Side Power Switch IC 4-Pin, PG-SOT223-4
