RS PRO Crimp Tool Crimp Tool for Insulated DIN Terminals Red, Yellow, Blue

查看所有Crimp Tools
可享批量折扣

小計（1 件）*

TWD4,807.00

(不含稅)

TWD5,047.35

(含稅)

Add to Basket
選擇或輸入數量
有庫存
  • 加上 42 件從 2026年3月02日 起發貨
  • 加上 4 件從 2026年3月30日 起發貨
  • 加上 8 件從 2026年4月24日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位
每單位
1 - 4TWD4,807.00
5 - 24TWD4,327.00
25 +TWD3,560.00

* 參考價格

RS庫存編號:
399-2019
Distrelec 貨號:
304-05-623
製造商:
RS PRO
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

RS PRO

Sub Type

Crimp Tool

Product Type

Crimp Tool

For Use With

Insulated DIN Terminals Red, Yellow, Blue

Handle Type

Anti-Slip, Ergonomic

Height Safe

No

Overall Length

225mm

Adjustable Ratchet

Yes

Standards/Approvals

No

Maximum Wire Size AWG

14

Minimum Wire Size mm²

0.75

Minimum Wire Size AWG

22

Maximum Wire Size mm²

6

豁免

COO (Country of Origin):
SE

RS Pro Ratchet Crimping Tool for Insulated Crimp Terminals


RS PRO Ratchet Crimping Tool – Overview


From RS PRO a durable, reliable hand operated precision ratchet crimping tool made from high-quality hardened steel alloy for crimping insulated crimp terminals. This hand tool consists of two handles with a non-slip ergonomic design for comfortable use, a ratchet mechanism, and a die assembly. The die assembly features 3 crimping profiles marked with a red, blue and yellow dot that correspond to the wire size being crimped for easy identification.

Ratchet Mechanism


The ratchet is pre-set to a specific force and remains locked until the handles of the tool are fully closed and the dies are bottomed. The handles cannot be opened until a full crimping cycle is achieved therefore preventing partial crimps. Once the cycle is complete the handles re-open. The ratchet also enables the operator to repeatedly produce consistent, high-quality crimps

This hand crimp tool also features a ratchet release trigger which, when pushed releases the tool handle in the event of obstructions or miscrimps

Adjustable Crimp Force


This hand crimping tool features a cam that is used to adjust the crimping force. The cam locking bolt and washer are removed using an Allen key and cam is simply turned to either loosen or tighten the tool. Once the required setting is selected the cam washer and bolt are locked back into place

Features and Benefits:


• Durable and easy to use

• Robust hardened steel alloy design

• Ratchet mechanism ensures that full crimp cycle is achieved

• Ratchet release mechanism

• Adjustable crimp force

• Crimping cavities marked with coloured wire dot for easy identification

• Ergonomically designed, non-slip handles for comfortable use

• Life span of 50000 cycles

Importance of a High-Quality Crimp

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

FAQs


What Terminals can this Crimping Tool be used with?

This hand crimping tool is designed for crimping insulated crimp terminals with a wire size range of 0.75 sq mm to 6 sq mm.

How to maintain the product?

• To maintain a good function and long life: Axles and other movable parts should be regularly lubricated

• Lubrication* is recommended at least every 10,000 cycles whenever tool is exposed to dirt or other contaminants

*Use a light mineral-free oil

相關連結