RS PRO KAA 0760 Crimp Tool Crimp Tool for Insulated Terminal

查看所有Crimp Tools
可享批量折扣

小計（1 件）*

TWD6,835.00

(不含稅)

TWD7,176.75

(含稅)

Add to Basket
選擇或輸入數量
暫時缺貨
  • 13 件從 2026年4月10日 起裝運發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位
每單位
1 - 4TWD6,835.00
5 - 24TWD6,151.00
25 +TWD5,063.00

* 參考價格

RS庫存編號:
267-3133
Distrelec 貨號:
304-04-622
製造商:
RS PRO
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

RS PRO

Sub Type

Crimp Tool

Product Type

Crimp Tool

For Use With

Insulated Terminal

Height Safe

Yes

Series

KAA 0760

Overall Length

255mm

Standards/Approvals

No

Minimum Wire Size AWG

20

Maximum Wire Size AWG

10

Minimum Wire Size mm²

0.5

Maximum Wire Size mm²

6

豁免

COO (Country of Origin):
SE

RS PRO Ergonomic Hand Crimp Tool


The KAA-0760 ergonomic hand crimp tool is designed for crimping red, blue and yellow pre-insulated crimp terminals with wires of cross-section range from 0.5 to 6.0mm2. This RS PRO ratchet hand crimp tool has asymmetric colour-coded die nests, a ratchet with safety release, and ergonomic handles allowing two-handed operation for a comfortable, secure crimping action.

For replacement die set see stock number 557-862

Features and Benefits:

• Non-slip main handle and low friction moving handle ensure a comfortable hand grip

• Provides two-hand grip in the final phase of crimping, increasing comfort and productivity

• Unique mechanism significantly reduces hand force requirement over competing for crimping tools

• The non-slip pad holds the tool in place when using on a work surface

• Full cycle crimp mechanism to ensure consistent, reliable crimp

• Ratchet release mechanism to clear miscrimps and obstruction

• Precision eccentric adjustment for consistent performance and ability to calibrate

• Hole in handle allows attachment of safety strap for working overhead

each tool has a unique serial number for traceability

• Durable: lifespan exceeds 50000 cycles

• High strength, through hardened alloy Swedish steel construction

• Compact size: only 255 mm of length

• Weight: 560g

Typical Applications:

• Maintenance & repair

• Electrical Installations

• Cable assemblies

FAQ’s:

What is the difference between un-insulated and insulated crimp tools?

Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present.

How do you maintain the product?

• Axles and other movable parts should be regularly lubricated.

• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants.

• Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly.

The Importance of a High-Quality Crimp

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

相關連結