Daniels Manufacturing M22520/7-01 Hand Ratcheting Crimp Tool Frame

查看所有Crimp Tools
可享批量折扣

小計（1 件）*

TWD37,112.00

(不含稅)

TWD38,967.60

(含稅)

Add to Basket
選擇或輸入數量
有庫存
  • 5 件準備從其他地點送貨
  • 加上 7 件從 2026年2月05日 起發貨
  • 加上 13 件從 2026年2月19日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位
每單位
1 - 4TWD37,112.00
5 +TWD35,999.00

* 參考價格

RS庫存編號:
314-8408
製造零件編號:
MH860
製造商:
Daniels Manufacturing
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

Daniels Manufacturing

Product Type

Crimp Tool Frame

Operation

Hand

Ratcheting

Yes

Series

M22520/7-01

Overall Length

190.5 mm

豁免

COO (Country of Origin):
US

Manufacturer's Warranty


DMC MH860 Miniature Adjustable Crimp Tool


A quality hand crimping tool for crimping circular connector contacts male and female. This handy tool has a cycle controlled precision ratchet which prevents the tool being opened before the crimping action is completed. This feature ensures accurate and consistently high-quality crimps are achieved each time and prevents partial crimps. An 8 indent selector knob on the tool enables the correct crimp setting to be selected and a positioner guide locks the positioner firmly in place.

Features and Benefits


• Lightweight

• Wire size: 16mm2 to 22 mm2 / 16-28 AWG

• 8-step selector knob for crimp depth selection

• Dual ratchet mechanism ensures that a full crimp cycle is achieved

• Minimum maintenance required

• Qualified to MIL-DTL-22520/7 and AS22520/7

Positioner


A positioner is not supplied with the tool and must be purchased separately.

Typical Applications:


• Maintenance & repair

• Electrical Installations

• Computer Interfacing

• Cable assemblies

FAQ:

How easy are they to use?

They are very easy to use, choose the male or female pin for application, insert the wire into the pin then open the crimp tool, insert into the hole of the indent crimper and squeeze until the cycle finishes.

How do you maintain the product?

• There is very little maintenance required for this tool, keep the indenter tips free of debris and dirt.

The Importance of a High-Quality Crimp

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

相關連結