Daniels Manufacturing M22520/2-01 Crimp Tool Frame Crimping Tool Frame for Crimp Contact

查看所有Crimp Tools
可享批量折扣

小計（1 件）*

TWD27,735.00

(不含稅)

TWD29,121.75

(含稅)

Add to Basket
選擇或輸入數量
有庫存
  • 43 件準備從其他地點送貨
  • 加上 20 件從 2026年3月19日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位
每單位
1 - 4TWD27,735.00
5 +TWD26,903.00

* 參考價格

RS庫存編號:
314-7607
製造零件編號:
AFM8
製造商:
Daniels Manufacturing
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

Daniels Manufacturing

Sub Type

Crimping Tool Frame

Product Type

Crimp Tool Frame

For Use With

Crimp Contact

Series

M22520/2-01

Overall Length

161mm

Standards/Approvals

No

豁免

COO (Country of Origin):
US

Manufacturer's Warranty


DMC AFM8 Miniature Adjustable Crimp Tool


A quality hand crimp tool for crimping circular connector contacts. This handy tool has a cycle controlled precision ratchet which prevents the tool being opened before the crimping action is completed. This feature ensures accurate and consistently high-quality crimps are achieved each time and prevents partial crimps. An 8 indent selector knob on the tool enables the correct crimp setting to be selected and a positioner guide locks the positioner firmly in place.

Features and Benefits


• Lightweight

• Wire size: 20 to 28 /20-32 AWG

• 8-step selector knob for crimp depth selection

• Ratchet mechanism ensures that a full crimp cycle is achieved

• Minimum maintenance required

• Interchangeable positioner compatible

Positioner


Positioners are not supplied with the tool and must be purchased separately. RS Stock no: 880-2277

Typical Applications:


• Maintenance & repair

• Electrical Installations

• Computer Interfacing

• Cable assemblies

FAQ:

How easy are they to use?

They are very easy to use, insert the contact pin into the hole of the crimp tool, load the wire into the contact pin, make sure it’s fully seated then and squeeze until the cycle finishes then finally check that you have a secure crimp.

How do you maintain the product?

• There is very little maintenance required for this tool, keep the indenter tips free of debris and dirt.

The Importance of a High-Quality Crimp

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

相關連結