TLV3201AIDCKT Texas Instruments 1-Channel Comparator Push Pull O/P, 40 ns 5.5 V 2.7 V 5-Pin SC-70
- RS庫存編號:
- 774-1284
- 製造零件編號:
- TLV3201AIDCKT
- 製造商:
- Texas Instruments
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計（1 袋，共 5 件）*
TWD254.00
(不含稅)
TWD266.70
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 加上 170 件從 2026年1月19日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每袋* |
|---|---|---|
| 5 - 60 | TWD50.80 | TWD254.00 |
| 65 - 120 | TWD49.80 | TWD249.00 |
| 125 + | TWD48.60 | TWD243.00 |
* 參考價格
- RS庫存編號:
- 774-1284
- 製造零件編號:
- TLV3201AIDCKT
- 製造商:
- Texas Instruments
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Texas Instruments | |
| Product Type | Comparator | |
| Comparator Type | Low Power | |
| Mount Type | Surface | |
| Package Type | SC-70 | |
| Output Type | Push Pull | |
| Number of Channels | 1 | |
| Typical Response Time | 40ns | |
| Pin Count | 5 | |
| Minimum Supply Voltage | 2.7V | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Length | 2.15mm | |
| Standards/Approvals | No | |
| Height | 1mm | |
| Width | 1.4 mm | |
| Automotive Standard | No | |
| Supply Current | 40μA | |
| 選取全部 | ||
|---|---|---|
品牌 Texas Instruments | ||
Product Type Comparator | ||
Comparator Type Low Power | ||
Mount Type Surface | ||
Package Type SC-70 | ||
Output Type Push Pull | ||
Number of Channels 1 | ||
Typical Response Time 40ns | ||
Pin Count 5 | ||
Minimum Supply Voltage 2.7V | ||
Maximum Supply Voltage 5.5V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Length 2.15mm | ||
Standards/Approvals No | ||
Height 1mm | ||
Width 1.4 mm | ||
Automotive Standard No | ||
Supply Current 40μA | ||
TLV series Low Voltage Comparators
Comparators, Texas Instruments
Texas Instruments’ range of voltage comparators includes not only conventional single, dual and quad comparator packages but also window comparators and over- & under-voltage supervisors.
Although comparators and operational amplifiers are superficially similar devices their operation in practical applications is very different. Op amps are intended for linear operation accompanied by suitable feedback whereas comparators are tailored for Rapid switching and generally operated in open-loop mode. Dedicated voltage comparators have significantly shorter propagation delays and are capable of Faster response times under saturated conditions. Most comparators are also more tolerant of high differential input voltages and many have open-collector outputs allowing parallel operation with other devices.
相關連結
- TLV3201AIDCKT Texas Instruments Push-Pull O/P, 2.7 → 5.5 V 5-Pin SC-70
- LMV7219M7/NOPB Texas Instruments Push-Pull O/P, 2.7 → 5 V 5-Pin SC-70
- MIC842NYC5-TR Microchip Push-Pull O/P, 1.5 → 5.5 V 5-Pin SC-70
- MIC841LYC5-TR Microchip Push-Pull O/P, 1.5 → 5.5 V 5-Pin SC-70
- MIC841NYC5-TR Microchip Push-Pull O/P, 1.5 → 5.5 V 5-Pin SC-70
- MCP6541T-I/LT Microchip Push-Pull O/P, 1.6 → 5.5 V 5-Pin SC-70
- MCP6541UT-I/LT Microchip Push-Pull O/P, 1.6 → 5.5 V 5-Pin SC-70
- MCP6546T-I/LT Microchip Push-Pull O/P, 4000ns 5.5 V 5-Pin SC-70