LMV7219M7/NOPB Texas Instruments, Comparator, Push-Pull O/P, 2.7 → 5 V 5-Pin SC-70
- RS庫存編號:
- 534-4771
- 製造零件編號:
- LMV7219M7/NOPB
- 製造商:
- Texas Instruments
小計（1 件）*
TWD85.00
(不含稅)
TWD89.25
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 加上 922 件從 2025年12月29日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD85.00 |
* 參考價格
- RS庫存編號:
- 534-4771
- 製造零件編號:
- LMV7219M7/NOPB
- 製造商:
- Texas Instruments
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Texas Instruments | |
| Comparator Type | General Purpose | |
| Mounting Type | Surface Mount | |
| Package Type | SC-70 | |
| Power Supply Type | Single | |
| Output Type | Push-Pull | |
| Number of Channels per Chip | 1 | |
| Pin Count | 5 | |
| Typical Single Supply Voltage | 2.7 → 5 V | |
| Dimensions | 2 x 1.25 x 0.9mm | |
| Length | 2mm | |
| Width | 1.25mm | |
| Height | 0.9mm | |
| Typical CMRR | 85dB | |
| Minimum Operating Temperature | -40 °C | |
| Maximum Operating Temperature | +85 °C | |
| Typical PSRR | 85dB | |
| 選取全部 | ||
|---|---|---|
品牌 Texas Instruments | ||
Comparator Type General Purpose | ||
Mounting Type Surface Mount | ||
Package Type SC-70 | ||
Power Supply Type Single | ||
Output Type Push-Pull | ||
Number of Channels per Chip 1 | ||
Pin Count 5 | ||
Typical Single Supply Voltage 2.7 → 5 V | ||
Dimensions 2 x 1.25 x 0.9mm | ||
Length 2mm | ||
Width 1.25mm | ||
Height 0.9mm | ||
Typical CMRR 85dB | ||
Minimum Operating Temperature -40 °C | ||
Maximum Operating Temperature +85 °C | ||
Typical PSRR 85dB | ||
LMV series Low Voltage Comparators
For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.
Comparators, Texas Instruments
Texas Instruments’ range of voltage comparators includes not only conventional single, dual and quad comparator packages but also window comparators and over- & under-voltage supervisors.
Although comparators and operational amplifiers are superficially similar devices their operation in practical applications is very different. Op amps are intended for linear operation accompanied by suitable feedback whereas comparators are tailored for rapid switching and generally operated in open-loop mode. Dedicated voltage comparators have significantly shorter propagation delays and are capable of faster response times under saturated conditions. Most comparators are also more tolerant of high differential input voltages and many have open-collector outputs allowing parallel operation with other devices.
Although comparators and operational amplifiers are superficially similar devices their operation in practical applications is very different. Op amps are intended for linear operation accompanied by suitable feedback whereas comparators are tailored for rapid switching and generally operated in open-loop mode. Dedicated voltage comparators have significantly shorter propagation delays and are capable of faster response times under saturated conditions. Most comparators are also more tolerant of high differential input voltages and many have open-collector outputs allowing parallel operation with other devices.
相關連結
- LMV7219M7/NOPB Texas Instruments Push-Pull O/P, 2.7 → 5 V 5-Pin SC-70
- TLV3201AIDCKT Texas Instruments Push-Pull O/P, 2.7 → 5.5 V 5-Pin SC-70
- LMV331M7/NOPB Texas Instruments 0.45μs 5 V 5-Pin SC-70-5
- LMV7219M5/NOPB Texas Instruments Push-Pull O/P, 2.7 → 5 V 5-Pin SOT-23
- LMV331SQ3T2G onsemi Open Drain O/P, 2.7 → 5 V 5-Pin SC-70
- LMV331ICT STMicroelectronics Open Drain O/P, 2.7 → 5 V 5-Pin SC-70
- TS3011ICT STMicroelectronics Push-Pull O/P, 8ns 2.2 → 5 V 5-Pin SC-70
- TS3021ICT STMicroelectronics Push-Pull O/P, 0.04μs 3 V 5-Pin SC-70