製造零件編號

Legrand 1 Output 220 VA Chassis Mount Transformer, 115 V, IEC/EN 61558-2-6, IEC/EN 61558-2-2, UL506, EN 61131-2, IEC/EN

RS庫存編號:: 383-364
製造零件編號:: 6 423 65
製造商:: Legrand

Legrand 1 Output 220 VA Chassis Mount Transformer, 115 V, IEC/EN 61558-2-6, IEC/EN 61558-2-2, UL506, EN 61131-2, IEC/EN

可享批量折扣

小計（1 件）*

TWD3,777.00

(不含稅)

TWD3,965.85

訂單超過 $1,300.00 免費送貨

有庫存

6 件準備從其他地點送貨
加上 4 件從 2026年3月18日起發貨
加上 4 件從 2026年3月25日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 - 9	TWD3,777.00
10 +	TWD3,615.00

* 參考價格

RS庫存編號:: 383-364
製造零件編號:: 6 423 65
製造商:: Legrand

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Legrand
	Primary Voltage	230 to 400 V
	Product Type	Chassis Mount Transformer
	Secondary Voltage	115 V
	Number of Outputs	1
	Power	220VA
	Fixing Hole Diameter	11mm
	Winding Type	Insulated Winding
	Maximum Operating Temperature	35°C
	Width	96 mm
	Length	96mm
	Minimum Operating Frequency	50Hz
	Standards/Approvals	IEC/EN 61558-2-6, IEC/EN 61558-2-2, UL506, EN 61131-2, IEC/EN 61558-2-4, EN 60204-1, EN 60439-1, CSA C22-2-N°66
	Maximum Operating Frequency	60Hz

	選取全部
	品牌 Legrand
	Primary Voltage 230 to 400 V
	Product Type Chassis Mount Transformer
	Secondary Voltage 115 V
	Number of Outputs 1
	Power 220VA
	Fixing Hole Diameter 11mm
	Winding Type Insulated Winding
	Maximum Operating Temperature 35°C
	Width 96 mm
	Length 96mm
	Minimum Operating Frequency 50Hz
	Standards/Approvals IEC/EN 61558-2-6, IEC/EN 61558-2-2, UL506, EN 61131-2, IEC/EN 61558-2-4, EN 60204-1, EN 60439-1, CSA C22-2-N°66
	Maximum Operating Frequency 60Hz

Legrand compact transformers open type single phase Data Sheet

COO (Country of Origin):: FR

Control Panel Primary 230/400Vac (40 to 220VA)

Compact, open type control panel transformer

Fully shrouded screw terminals with permanent marking

Detailed product specification permanently marked on front of unit

VA ratings compatible with available protection devices

Dual standard primary winding 230 / 400Vac

Laminated

Note

Mounting clips are not supplied with these products. Transformers up to 160 VA can be clipped to DIN rail using accessory 0044 16, RS stock number 423-2201 or 620-3592 for higher values or directly fixed using screws through the easily accessible fixing points.

Standards

IEC/EN 61 558