Microchip MCP2551-I/SN, CAN Transceiver 1Mbps ISO 11898, 8-Pin SOIC
- RS庫存編號:
- 738-6036
- 製造零件編號:
- MCP2551-I/SN
- 製造商:
- Microchip
小計（1 包，共 2 件）*
TWD86.00
(不含稅)
TWD90.30
(含稅)
訂單超過 $1,300.00 免費送貨
正在逐步停售
- 最終 10 個，準備發貨
單位 | 每單位 | 每包* |
|---|---|---|
| 2 + | TWD43.00 | TWD86.00 |
* 參考價格
- RS庫存編號:
- 738-6036
- 製造零件編號:
- MCP2551-I/SN
- 製造商:
- Microchip
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Microchip | |
| Maximum Data Rate | 1Mbps | |
| Number of Transceivers | 1 | |
| IC Type | CAN Transceiver IC | |
| Standard Supported | ISO 11898 | |
| Power Down Mode | Sleep, Standby | |
| Maximum Supply Current | 75 mA | |
| Mounting Type | Surface Mount | |
| Package Type | SOIC | |
| Pin Count | 8 | |
| Dimensions | 4.9 x 3.9 x 1.25mm | |
| Length | 4.9mm | |
| Width | 3.9mm | |
| Height | 1.25mm | |
| Maximum Operating Supply Voltage | 5.5 V | |
| Minimum Operating Supply Voltage | 4.5 V | |
| Maximum Operating Temperature | +85 °C | |
| Minimum Operating Temperature | -40 °C | |
| 選取全部 | ||
|---|---|---|
品牌 Microchip | ||
Maximum Data Rate 1Mbps | ||
Number of Transceivers 1 | ||
IC Type CAN Transceiver IC | ||
Standard Supported ISO 11898 | ||
Power Down Mode Sleep, Standby | ||
Maximum Supply Current 75 mA | ||
Mounting Type Surface Mount | ||
Package Type SOIC | ||
Pin Count 8 | ||
Dimensions 4.9 x 3.9 x 1.25mm | ||
Length 4.9mm | ||
Width 3.9mm | ||
Height 1.25mm | ||
Maximum Operating Supply Voltage 5.5 V | ||
Minimum Operating Supply Voltage 4.5 V | ||
Maximum Operating Temperature +85 °C | ||
Minimum Operating Temperature -40 °C | ||
- COO (Country of Origin):
- TH
MCP2551 CAN Transceivers
The Microchip MCP2551 is a high-speed CAN Transceiver that can operate at speeds of up to 1 Mbps. Serving as an interface between a CAN Controller and the physical bus, the MCP2551 provides differential transmit and receive capability and is fully compatible with ISO 11898. The MCP2551 is suitable for both 12 V and 24 V systems.
Features
Supports 1 Mbps operation
Slope control input
Implements ISO 11898 physical layer requirements
Suitable for 12 V and 24 V systems
Externally controlled slope for reduced RFI emissions
Permanent dominant detect
Low-current standby operation
High noise immunity due to differential bus implementation
Slope control input
Implements ISO 11898 physical layer requirements
Suitable for 12 V and 24 V systems
Externally controlled slope for reduced RFI emissions
Permanent dominant detect
Low-current standby operation
High noise immunity due to differential bus implementation
For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.
CAN Bus Communication - Microchip