規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Microchip
	Maximum Data Rate	1Mbps
	Product Type	CAN Transceiver
	Number of Transceivers	1
	Sub Type	CAN Transceiver
	Power Down Mode	High Speed, Standby, Slope Control
	Supply Current	75mA
	Mount Type	Through Hole
	Package Type	PDIP
	Interface Type	ISO 11898
	Pin Count	8
	Minimum Supply Voltage	4.5V
	Maximum Supply Voltage	5.5V
	ESD Protection	Yes
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	125°C
	Standards/Approvals	No
	Length	10.16mm
	Height	4.83mm
	Width	7.11 mm
	Series	MCP2551
	Automotive Standard	No

	選取全部
	品牌 Microchip
	Maximum Data Rate 1Mbps
	Product Type CAN Transceiver
	Number of Transceivers 1
	Sub Type CAN Transceiver
	Power Down Mode High Speed, Standby, Slope Control
	Supply Current 75mA
	Mount Type Through Hole
	Package Type PDIP
	Interface Type ISO 11898
	Pin Count 8
	Minimum Supply Voltage 4.5V
	Maximum Supply Voltage 5.5V
	ESD Protection Yes
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 125°C
	Standards/Approvals No
	Length 10.16mm
	Height 4.83mm
	Width 7.11 mm
	Series MCP2551
	Automotive Standard No

Datasheet

COO (Country of Origin):: TH

The MCP2551 is a high-speed CAN transceiver, fault-tolerant device that serves as the interface between a CAN protocol controller and the physical bus. The MCP2551 provides differential transmit and receive capability for the CAN protocol controller and is fully compatible with the ISO-11898 standard, including 24V requirements. It will operate at speeds of up to 1 Mb/s.

Slope control input

Supports 1 Mb/s operation

Suitable for 12V and 24V systems

Externally-controlled slope for reduced RFIemissions

Permanent dominant detect

Low current standby operation

High noise immunity due to differential busimplementation

Microchip MCP2551-E/P, CAN Transceiver 1 Mbps, 8-Pin PDIP

相關連結