Microchip, CAN Transceiver 1 Mbps, 8-Pin PDIP
- RS庫存編號:
- 177-1626
- 製造零件編號:
- MCP2551-E/P
- 製造商:
- Microchip
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計（1 管，共 60 件）*
TWD4,020.00
(不含稅)
TWD4,221.00
(含稅)
庫存資訊目前無法存取 - 請稍後再回來查看
單位 | 每單位 | 每管* |
|---|---|---|
| 60 - 60 | TWD67.00 | TWD4,020.00 |
| 120 + | TWD65.00 | TWD3,900.00 |
* 參考價格
- RS庫存編號:
- 177-1626
- 製造零件編號:
- MCP2551-E/P
- 製造商:
- Microchip
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Microchip | |
| Product Type | CAN Transceiver | |
| Maximum Data Rate | 1Mbps | |
| Number of Transceivers | 1 | |
| Sub Type | CAN Transceiver | |
| Power Down Mode | High Speed, Standby, Slope Control | |
| Supply Current | 75mA | |
| Mount Type | Through Hole | |
| Package Type | PDIP | |
| Interface Type | ISO 11898 | |
| Pin Count | 8 | |
| Minimum Supply Voltage | 4.5V | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Operating Temperature | -40°C | |
| ESD Protection | Yes | |
| Maximum Operating Temperature | 125°C | |
| Width | 7.11 mm | |
| Standards/Approvals | No | |
| Series | MCP2551 | |
| Height | 4.83mm | |
| Length | 10.16mm | |
| Automotive Standard | No | |
| 選取全部 | ||
|---|---|---|
品牌 Microchip | ||
Product Type CAN Transceiver | ||
Maximum Data Rate 1Mbps | ||
Number of Transceivers 1 | ||
Sub Type CAN Transceiver | ||
Power Down Mode High Speed, Standby, Slope Control | ||
Supply Current 75mA | ||
Mount Type Through Hole | ||
Package Type PDIP | ||
Interface Type ISO 11898 | ||
Pin Count 8 | ||
Minimum Supply Voltage 4.5V | ||
Maximum Supply Voltage 5.5V | ||
Minimum Operating Temperature -40°C | ||
ESD Protection Yes | ||
Maximum Operating Temperature 125°C | ||
Width 7.11 mm | ||
Standards/Approvals No | ||
Series MCP2551 | ||
Height 4.83mm | ||
Length 10.16mm | ||
Automotive Standard No | ||
- COO (Country of Origin):
- US
The MCP2551 is a high-speed CAN transceiver, fault-tolerant device that serves as the interface between a CAN protocol controller and the physical bus. The MCP2551 provides differential transmit and receive capability for the CAN protocol controller and is fully compatible with the ISO-11898 standard, including 24V requirements. It will operate at speeds of up to 1 Mb/s.
Slope control input
Supports 1 Mb/s operation
Suitable for 12V and 24V systems
Externally-controlled slope for reduced RFIemissions
Permanent dominant detect
Low current standby operation
High noise immunity due to differential busimplementation