Vishay Bridge Rectifier, 1.6A, 65V, 4-Pin
- RS庫存編號:
- 700-5386
- 製造零件編號:
- B40C1500G-E4/51
- 製造商:
- Vishay
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計（1 包，共 20 件）*
TWD404.00
(不含稅)
TWD424.20
(含稅)
訂單超過 $1,300.00 免費送貨
最後的 RS 庫存
- 加上 80 件從 2025年12月29日 起發貨
- 最終 6,380 件從 2026年1月05日 起發貨
單位 | 每單位 | 每包* |
|---|---|---|
| 20 - 740 | TWD20.20 | TWD404.00 |
| 760 - 1480 | TWD19.70 | TWD394.00 |
| 1500 + | TWD19.30 | TWD386.00 |
* 參考價格
- RS庫存編號:
- 700-5386
- 製造零件編號:
- B40C1500G-E4/51
- 製造商:
- Vishay
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Vishay | |
| Peak Average Forward Current | 1.6A | |
| Bridge Type | Single Phase | |
| Peak Reverse Repetitive Voltage | 65V | |
| Mounting Type | Through Hole | |
| Package Type | WOG | |
| Pin Count | 4 | |
| Configuration | Single | |
| Peak Non-Repetitive Forward Surge Current | 50A | |
| Maximum Operating Temperature | +125 °C | |
| Minimum Operating Temperature | -40 °C | |
| Peak Forward Voltage | 1V | |
| Peak Reverse Current | 10µA | |
| Length | 9.86mm | |
| Dimensions | 9.86 x 8.84 x 5.6mm | |
| Width | 8.84mm | |
| Height | 5.6mm | |
| 選取全部 | ||
|---|---|---|
品牌 Vishay | ||
Peak Average Forward Current 1.6A | ||
Bridge Type Single Phase | ||
Peak Reverse Repetitive Voltage 65V | ||
Mounting Type Through Hole | ||
Package Type WOG | ||
Pin Count 4 | ||
Configuration Single | ||
Peak Non-Repetitive Forward Surge Current 50A | ||
Maximum Operating Temperature +125 °C | ||
Minimum Operating Temperature -40 °C | ||
Peak Forward Voltage 1V | ||
Peak Reverse Current 10µA | ||
Length 9.86mm | ||
Dimensions 9.86 x 8.84 x 5.6mm | ||
Width 8.84mm | ||
Height 5.6mm | ||
Bridge Rectifiers with Wire Leads, B...C1500G Series, Vishay Semiconductor
Low forward voltage drop
High dielectric strength case
Wire Lead structure for Printed Circuit Board (PCB) through hole mounting
High dielectric strength case
Wire Lead structure for Printed Circuit Board (PCB) through hole mounting
For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.
Bridge Rectifiers - Vishay Semiconductor
The Bridge Rectifier converts an Alternating Current (AC) input into a Direct Current (DC) output for full-wave rectification applications. The diode arrangement provides the same polarity of output for either polarity of input. A three-phase full-wave rectifier is an arrangement of six diodes in a bridge circuit configuration. The packages are designed for minimal size, highest reliability and maximum thermal performance.