Vishay Bridge Rectifier, 200 V 50 A, 4-Pin Single
- RS庫存編號:
- 815-1115
- 製造零件編號:
- B125C1500G-E4/51
- 製造商:
- Vishay
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計（1 包，共 20 件）*
TWD394.00
(不含稅)
TWD413.60
(含稅)
訂單超過 $1,300.00 免費送貨
最後的 RS 庫存
- 最終 2,020 個，準備發貨
單位 | 每單位 | 每包* |
|---|---|---|
| 20 - 740 | TWD19.70 | TWD394.00 |
| 760 - 1480 | TWD19.20 | TWD384.00 |
| 1500 + | TWD19.00 | TWD380.00 |
* 參考價格
- RS庫存編號:
- 815-1115
- 製造零件編號:
- B125C1500G-E4/51
- 製造商:
- Vishay
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Vishay | |
| Product Type | Bridge Rectifier | |
| Peak Reverse Repetitive Voltage Vrrm | 200V | |
| Mount Type | Through Hole | |
| Number of Phases | 1 | |
| Package Type | WOG | |
| Pin Count | 4 | |
| Configuration | Single | |
| Maximum Operating Temperature | 125°C | |
| Peak Non-Repetitive Forward Surge Current Ifsm | 50A | |
| Minimum Operating Temperature | -40°C | |
| Forward Current If | 1.6A | |
| Peak Forward Voltage Vf | 1V | |
| Series | B125C1 | |
| Standards/Approvals | No | |
| Length | 9.86mm | |
| Height | 5.6mm | |
| Peak Reverse Current Ir | 10μA | |
| Width | 8.84 mm | |
| Automotive Standard | No | |
| 選取全部 | ||
|---|---|---|
品牌 Vishay | ||
Product Type Bridge Rectifier | ||
Peak Reverse Repetitive Voltage Vrrm 200V | ||
Mount Type Through Hole | ||
Number of Phases 1 | ||
Package Type WOG | ||
Pin Count 4 | ||
Configuration Single | ||
Maximum Operating Temperature 125°C | ||
Peak Non-Repetitive Forward Surge Current Ifsm 50A | ||
Minimum Operating Temperature -40°C | ||
Forward Current If 1.6A | ||
Peak Forward Voltage Vf 1V | ||
Series B125C1 | ||
Standards/Approvals No | ||
Length 9.86mm | ||
Height 5.6mm | ||
Peak Reverse Current Ir 10μA | ||
Width 8.84 mm | ||
Automotive Standard No | ||
- COO (Country of Origin):
- CN
Bridge Rectifiers with Wire Leads, B...C1500G Series, Vishay Semiconductor
Low forward voltage drop
High dielectric strength case
Wire Lead structure for Printed Circuit Board (PCB) through hole mounting
Bridge Rectifiers - Vishay Semiconductor
The Bridge Rectifier converts an Alternating Current (AC) input into a Direct Current (DC) output for full-wave rectification applications. The diode arrangement provides the same polarity of output for either polarity of input. A three-phase full-wave rectifier is an arrangement of six diodes in a bridge circuit configuration. The packages are designed for minimal size, highest reliability and maximum thermal performance.