Vero Technologies 11-2496 Breadboard Prototyping Board 1.6 mm 200 mm 100 mm

查看所有Breadboards
可享批量折扣

小計（1 件）*

TWD1,616.00

(不含稅)

TWD1,696.80

(含稅)

Add to Basket
選擇或輸入數量
下方訂單 TWD1,300.00（不含稅）成本 TWD500.00。
有庫存
  • 加上 2 件從 2026年2月23日 起發貨
  • 加上 3 件從 2026年4月10日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位
每單位
1 - 9TWD1,616.00
10 - 39TWD1,584.00
40 +TWD1,561.00

* 參考價格

RS庫存編號:
434-352
製造零件編號:
11-2496
製造商:
Vero Technologies
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

Vero Technologies

Sub Type

Prototyping Board

Product Type

Breadboard

Length

100mm

Width

200 mm

Height

1.6mm

Standards/Approvals

RoHS

COO (Country of Origin):
GB

Development Boards


DIN Type Stripboards


Suitable for use with the KM6-II eurocard sub-rack systems


The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way DIN 41612 indirect edge connectors may be fitted at either end.

The 3U (100x160) and 6U (233.4x160) boards are available with plated through holes (pth) as an alternative to the standard types. These boards have the added advantage of linking the top with the bottom pads directly via the holes, thereby dispensing with the need to fit linking pins, etc. Also the integrity of the joint is improved as the solder forms round the component lead on both surfaces, in addition to flowing through the hole. This helps to produce a solid and reliable connection, which is very important in applications where a high degree of vibration may be encountered.

Eurocards are manufactured from either epoxy glass material (blue) to BS4584 Part 3 or 16, or SRBP (synthetic resin bonded paper) material to BS4584 Part 5. Card thickness is 1.6mm. Copper 305g/m2 (1oz/ft2). Holes 1.0mm (0.040in.) dia. are pre-drilled on a 2.54mm matrix and all cards can be used with indirect edge connectors to DIN41612 (see Connectors/Terminals) except SRBP stripboard.

Note

Single-sided microboards have the same wiring pattern as the double-sided types, but omit the ground plane and 0 Volt rails on the component side of the card.

相關連結