最近搜索

    Prototyping Boards

    In any manufacturing process, prototyping and testing your schematic design are essential steps. To ensure your product is free of bugs and design flaws, you should test it before sending it to the manufacturer. In this stage, you can spot flaws in your design and fix them quickly using prototyping boards. As we don't want you to end up receiving thousands of defective products.

    Prototyping Boards

    Prototyping boards, also referred to as PCBs (printed circuit boards), have innumerable uses throughout the electronics industry, such as designing/constructing electrical circuits, prototyping, assembly, and other electrical engineering applications.

    Designing an electrical item requires a prototype printed circuit board. Components are connected using conductive tracks on printed circuit boards. On the other hand, printed circuit boards are more economical to produce than traditional circuit boards. Since they are printed, complicated wiring is not required.

    Business owners in the electronics design industry can benefit greatly from a faster manufacturing process since prototyping boards are less labour-intensive to manufacture.

    Types of prototyping boards available

    We stock a wide selection of prototyping PCBs for a range of different electronic work, including all stages of planning, testing, and delivery. Among our advanced catalogue of printed circuit board products, you will find:

    1 - Motherboards

    Motherboards are the primary printed circuit boards in computers. Chipsets, processors, and memory are all connected through them.

    It is not uncommon for a large motherboard's PCB to be comprised of six to fourteen layers of fibreglass and copper traces to connect the PCB together, as well as copper planes to isolate power and signal. However, through expansion slots, motherboards can be extended with other components.

    2 - Breadboards

    Breadboards consist of plastic structures that have holes connected horizontally and vertically via copper wires enclosed in the plastic. Reusable solder-free plugboards for plug-and-play prototyping and circuit design/testing.

    3 - Printed Circuit Boards

    A printed circuit board, or PCB, provides mechanical support and electrical connections by means of conductive paths, traces, or signals micro-etched onto copper and laminated to a non-conductive surface.

    4 - Matrix boards

    Prototype circuit boards are used for laying out electrical components securely in both high-frequency and analogue circuit building.

    5 - Stripboards

    A form of electronics prototyping board with a rectangular grid of holes (also known as Veroboard), for creating a robust permanent circuit with reliable connections while eliminating the need for separate terminal pins.

    6 - LED prototyping boards

    Construction bases for making and testing sample circuits based around individual or linked LED modules.

    7 - Eurocards

    European standard format PCBs that can be plugged together into a standardised subrack, compatible with a wide range of connector types (including numerous original DIN connector standards)

    8 - Copper clad boards and photoresist boards

    light-sensitive material sheets for producing and prototyping PCBs, made from high-quality glass epoxy with a copper foil bonded to one/both sides

    Backplanes & Motherboards
    Backplanes & Motherboards
    Breadboard Jumper Wires
    Breadboard Jumper Wires
    Breadboards
    Breadboards
    Copper Clad Boards
    Copper Clad Boards
    Eurocards
    Eurocards
    Extender Boards & Adapter Boards
    Extender Boards & Adapter Boards
    Grounding Contacts
    Grounding Contacts
    LED Prototyping Boards
    LED Prototyping Boards
    Matrix Boards
    Matrix Boards
    Stripboards
    Stripboards
    Wiring Combs
    Wiring Combs

    622 產品顯示為 Prototyping Boards

    1 的 32
    SSP-82, 64 Way Double Sided Extender Board Converter Board FR4 45.08 x 71.85 x 1mm
    • RS庫存編號 354-9413
    • 製造零件編號 SSP-82
    個
    TWD462.00
    01-3939, Single-Sided Stripboard FR-2 292 x 95 x 1.6mm FR1
    • RS庫存編號 433-826
    • 製造零件編號 01-3939
    個
    TWD539.00
    09-1034, Single-Sided Stripboard FR-2 160 x 100 x 1.6mm FR1
    • RS庫存編號 100-4328
    • 製造零件編號 09-1034
    個
    TWD315.00
    Vero Technologies Single Sided Matrix Board FR4 With 54 x 34 1.02mm Holes, 2.54 x 2.54mm Pitch, 160 x 100 x 1.6mm
    • RS庫存編號 434-605
    • 製造零件編號 03-0026
    個
    TWD870.00
    SSP-51, 32 Way Double Sided Extender Board Converter Board FR4 46.99 x 55.34 x 1mm
    • RS庫存編號 354-9362
    • 製造零件編號 SSP-51
    個
    TWD371.00
    188-39011D, 96 Way Extender Board Extender board FR4
    • RS庫存編號 546-0205
    • 製造零件編號 188-39011D
    個
    TWD14,185.00
    Breadboard Prototyping Board 240 x 195 x 21mm
    • RS庫存編號 102-9169
    個
    TWD855.00
    01-3938, Single-Sided Stripboard FR-2 291.3 x 95.4 x 1.6mm FR1
    • RS庫存編號 433-832
    • 製造零件編號 01-3938
    個
    TWD516.00
    01-0021, Single-Sided Stripboard 121.92 x 101.6mm
    • RS庫存編號 100-4081
    • 製造零件編號 01-0021
    個
    TWD437.00
    01-0043, Single-Sided Stripboard FR-2 454.66 x 119.38 x 1.6mm FR1
    • RS庫存編號 434-201
    • 製造零件編號 01-0043
    個
    TWD1,146.00
    HARWIN 5.5mm Grounding Contact
    • RS庫存編號 788-4868
    • 製造零件編號 S7061-42R
    個 (每包:10個)
    TWD11.70
    Single-Sided Stripboard Epoxy Glass 454.66 x 95.1 x 1.6mm FR4
    • RS庫存編號 100-4110
    個
    TWD2,718.00
    Single-Sided Stripboard FR-2 454.66 x 119.38 x 1.6mm FR1
    • RS庫存編號 195-1094
    個
    TWD1,419.00
    ADB16, Single-Sided Copper Clad Board FR4 With 35μm Copper Thick, 160 x 100 x 0.8mm
    • RS庫存編號 890-3610
    • 製造零件編號 ADB16
    個
    TWD136.00
    HARWIN 3mm RFI Shield Clip
    • RS庫存編號 161-3687
    • 製造零件編號 S02-20150300
    1 盤 1 套
    TWD122.00
    Vero Technologies Matrix Board FR2 With 58 x 42 1.3mm Holes, 2.54 x 2.54mm Pitch, 148.08 x 114.3 x 1.6mm
    • RS庫存編號 485-3892
    • 製造零件編號 01-3936
    個
    TWD194.00
    281, LED Prototyping Board
    • RS庫存編號 181-0722
    • 製造零件編號 281
    個 (每包:4個)
    TWD117.00
    CIF Single Sided Matrix Board FR4 1mm Holes, 2.54 x 2.54mm Pitch, 300 x 160 x 1.6mm
    • RS庫存編號 457-0777
    • 製造零件編號 AGP30
    個
    TWD820.00
    CIF Double Sided Matrix Board FR4 With 40 x 60 0.35mm Holes, 1.27 x 1.27mm Pitch, 160 x 100 x 1.5mm
    • RS庫存編號 745-0837
    • 製造零件編號 AL436
    個
    TWD823.00
    Breadboard Prototyping Board 80 x 60 x 10mm
    • RS庫存編號 102-9147
    個
    TWD440.00
    每頁顯示的結果
    1
    2
    3
    32